A 4-Channel 12-Bit High-Voltage Radiation-Hardened Digital-to-Analog Converter for Low Orbit Satellite Applications

This paper presents a circuit design and an implementation of a four-channel 12-bit digital-to-analog converter (DAC) with high-voltage operation and radiation-tolerant attribute using a specific CSMC H8312 0.5-mu m Bi-CMOS technology to achieve the functionality across a wide-temperature range from -55 degrees C to 125 degrees C. In this paper, an R-2R resistor network is adopted in the DAC to provide necessary resistors matching which improves the DAC precision and linearity with both the global common centroid and local common centroid layout. Therefore, no additional, complicated digital calibration or laser-trimming are needed in this design. The experimental and measurement results show that the maximum frequency of the single-chip four-channel 12-bit R-2R ladder high-voltage radiation-tolerant DAC is 100 kHz, and the designed DAC achieves the maximum value of differential non-linearity of 0.18 LSB, and the maximum value of integral non-linearity of -0.53 LSB at 125 degrees C, which is close to the optimal DAC performance. The performance of the proposed DAC keeps constant over the whole temperature range from -55 degrees C to 125 degrees C. Furthermore, an enhanced radiation-hardened design has been demonstrated by utilizing a radiation chamber experimental setup. The fabricated radiation-tolerant DAC chipset occupies a die area of 7 mm x 7 mm in total including pads (core active area of 4 mm x 5 mm excluding pads) and consumes less than 525 mW, output voltage ranges from -10 to +10 V.