The use of unconventional reinforcements in structures - Design aspects

被引：0
|
作者：
Jaafar, K. [1 ]
机构：
[1] Univ Wollongong, Dubai, U Arab Emirates
来源：
STRUCTURES AND ARCHITECTURE: CONCEPTS: APPLICATIONS AND CHALLENGES | 2013年
关键词：
CONCRETE BEAMS; SHEAR; CONFINEMENT; BEHAVIOR;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Common transverse reinforcement of reinforced concrete members with circular cross section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete beams, then under combined action of moment and shear, spirals will be required to provide or contribute to proper shear resistance. Hence a proper assessment for spiral shear contribution is required. The validity of concepts which underline current methods for shear design used in design codes will be investigated in this paper especially for beams with the shear configuration used, which violates basic code rules on forming a truss. A method for evaluating the shear capacity of beams with spirals has also been proposed.
引用
收藏
页码：733 / 742
页数：10
相关论文
共 50 条
  • [21] Enhanced design of hourglass truss sandwich structures for compressive resistance
    Feng LiJia
    Yu GuoCai
    Ma Li
    Wu LinZhi
    Zhang AMan
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2020, 63 (12) : 2717 - 2728
  • [22] A mechanical model for shear design of steel fiber reinforced concrete beams without shear reinforcements
    Bi, Jihong
    Wang, Zhaoyao
    Zhao, Yun
    Huo, Linying
    Xie, Yuhang
    STRUCTURES, 2021, 31 : 216 - 229
  • [23] Engineering aspects of geotechnical tunnel design
    Goricki, A.
    ROCK MECHANICS FOR RESOURCES, ENERGY AND ENVIRONMENT, 2013, : 3 - 13
  • [24] Role of weave design on the mechanical properties of 3D woven fabrics as reinforcements for structural composites
    Dash, Ashwini Kumar
    Behera, Bijoya Kumar
    JOURNAL OF THE TEXTILE INSTITUTE, 2018, 109 (07) : 952 - 960
  • [25] The design of pins in steel structures
    Bridge, RQ
    ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2, 1999, : 229 - 236
  • [26] Effect of different reinforcements on sliding wear of aluminium matrix composites using Taguchi design of experimental technique
    Ekka, Kiran Kumar
    Chauhan, S. R.
    Varun
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015, 22 (02) : 195 - 202
  • [27] Design approach for flexural capacity of concrete T-beams with bonded prestressed and nonprestressed FRP reinforcements
    Peng, Fei
    Xue, Weichen
    COMPOSITE STRUCTURES, 2018, 204 : 333 - 341
  • [28] Influences of dispersion types and area densities of chopped fiber-based interfacial reinforcements on mechanical properties of sandwich structures
    Wang, Zhi
    Chen, Qihui
    Du, Ruikui
    Ting Linghu
    Gao, Yingju
    Zhao, Guizhe
    POLYMER COMPOSITES, 2019, 40 : E449 - E455
  • [29] Perspectives on Adhesive-Bolted Hybrid Connection between Fe Shape Memory Alloys and Concrete Structures for Active Reinforcements
    Qiang, Xuhong
    Zhang, Delin
    Wu, Yapeng
    Jiang, Xu
    APPLIED SCIENCES-BASEL, 2024, 14 (19):
  • [30] An improved design model for the shear capacity of monolithic uncracked interfaces based on the contribution degrees of concrete and shear reinforcements
    Liu, Jie
    Huang, Xiangyu
    Chen, Xuyong
    Huang, Minshui
    Wu, Qiaoyun
    STRUCTURES, 2024, 65
12345