The use of unconventional reinforcements in structures - Design aspects

被引：0
|
作者：
Jaafar, K. [1 ]
机构：
[1] Univ Wollongong, Dubai, U Arab Emirates
来源：
STRUCTURES AND ARCHITECTURE: CONCEPTS: APPLICATIONS AND CHALLENGES | 2013年
关键词：
CONCRETE BEAMS; SHEAR; CONFINEMENT; BEHAVIOR;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Common transverse reinforcement of reinforced concrete members with circular cross section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete beams, then under combined action of moment and shear, spirals will be required to provide or contribute to proper shear resistance. Hence a proper assessment for spiral shear contribution is required. The validity of concepts which underline current methods for shear design used in design codes will be investigated in this paper especially for beams with the shear configuration used, which violates basic code rules on forming a truss. A method for evaluating the shear capacity of beams with spirals has also been proposed.
引用
收藏
页码：733 / 742
页数：10
相关论文
共 50 条
  • [11] Size and shape optimization of aluminum tubes with GFRP honeycomb reinforcements for crashworthy aircraft structures
    Paz, J.
    Diaz, J.
    Romera, L.
    Costas, M.
    COMPOSITE STRUCTURES, 2015, 133 : 499 - 507
  • [12] Use of vegetable fibers as reinforcements in cement-matrix composite materials: A review
    Laverde, Valeria
    Marin, Angie
    Benjumea, Jose M.
    Ortiz, Mauricio Rincon
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 340
  • [13] Experimental Studies of Low-Reinforced Concrete Structures Containing Inter-Bay Construction Joints Strengthened with Prestressed Basalt Composite Reinforcements and External Transverse Reinforcements
    Rubin, Oleg
    Kozlov, Dmitry
    Antonov, Anton
    Almasri, Amer
    BUILDINGS, 2024, 14 (11)
  • [14] Effect of block copolymer nano-reinforcements on the low velocity impact response of sandwich structures
    Ramakrishnan, Karthik Ram
    Guerard, Sandra
    Viot, Philippe
    Shankar, Krishna
    COMPOSITE STRUCTURES, 2014, 110 : 174 - 182
  • [15] Use of induction-heating in steel structures: Material properties and novel brace design
    Skalomenos, Konstantinos A.
    Kurata, Masahiro
    Shimada, Hironari
    Nishiyama, Minehiro
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 148 : 112 - 123
  • [16] The Potential Use of Electrospun Polylactic Acid Nanofibers as Alternative Reinforcements in an Epoxy Composite System
    Dong, Yu
    Mosaval, Tariq
    Haroosh, Hazim J.
    Umer, Rehan
    Takagi, Hitoshi
    Lau, Kin-Tak
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2014, 52 (09) : 618 - 623
  • [17] A design concept with the use of RUHTCC beam to improve crack control and durability of concrete structures
    Li, Qinghua
    Xu, Shilang
    MATERIALS AND STRUCTURES, 2011, 44 (06) : 1151 - 1177
  • [18] Elastoplastic analysis of soil-structures strengthened by two-directional reinforcements using a multiphase approach
    Hassen, Ghazi
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, 47 (7-8) : 1040 - 1047
  • [19] Design and characterization of 3D multilayer woven reinforcements shape memory polymer composites
    Goda, Ibrahim
    Zubair, Zakariya
    L'Hostis, Gildas
    Drean, Jean-Yves
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (05) : 653 - 673
  • [20] A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements
    Zhang, Dawei
    Ueda, Tamon
    Furuuchi, Hitoshi
    JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2012, 10 (09) : 285 - 300
12345