A viscoelastic viscoplastic constitutive model including mechanical degradation: Uniaxial transient finite element formulation at finite strains and application to space truss structures

被引:20
作者
Carniel, T. A. [1 ]
Munoz-Rojas, P. A. [1 ]
Vaz, M., Jr. [1 ]
机构
[1] Univ Estado Santa Catarina, Dept Mech Engn, BR-89219710 Joinville, Brazil
关键词
Viscoelasticity; Viscoplasticity; Damage; Nonlinear transient analysis; IMPACT; DAMAGE; IMPLEMENTATION; POLYETHYLENE;
D O I
10.1016/j.apm.2014.09.036
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This article presents a one-dimensional finite element formulation for the transient analysis of geometrically nonlinear trusses associated to viscoelastic viscoplastic materials including mechanical degradation. The proposed formulation aims at problems involving inertial loads and high strain rate deformations, and accounts for velocities, accelerations and rate-dependent effects. The kinematic description adopts an updated Lagrangian approach, whereas the dynamic equilibrium equations are solved using the Newmark algorithm coupled to an incremental-iterative Newton-Raphson procedure. The viscoelastic and viscoplastic behaviors are accounted for the generalized Kelvin-Voigt and Perzyna models, and material degradation is considered using Continuum Damage Mechanics. The evolution equations are integrated using an implicit scheme, including derivation of the analytical tangent stiffness and algorithmic material tangent operator. Numerical examples illustrate application of the proposed formulation to the analysis of polymeric truss structures undergoing snap-through. (C) 2014 Elsevier Inc. All rights reserved.
引用
收藏
页码:1725 / 1739
页数:15
相关论文
共 34 条
[1]   Numerical implementation of a damage-coupled material law for semicrystalline polyethylene [J].
Alvarado-Contreras, J. A. ;
Polak, M. A. ;
Penlidis, A. .
ENGINEERING COMPUTATIONS, 2012, 29 (3-4) :295-320
[2]  
Belytschko Ted., 2006, Nonlinear Finite Elements for Continua and Structures
[3]  
Bonet J., 1997, Nonlinear continuum mechanics for finite element analysis
[4]  
Calcagno Barbara O., 2010, Zeitschrift Kunststofftechnik / Journal of Plastics Technology, P229
[5]  
Chandrupatla T.R., 2002, INTRO FINITE ELEMENT, V3rd
[6]   An analysis of impact-induced deformation and fracture modes in amorphous glassy polymers [J].
Chowdhury, K. A. ;
Benzerga, A. A. ;
Talreja, R. .
ENGINEERING FRACTURE MECHANICS, 2008, 75 (11) :3328-3342
[7]  
Cook R.D., 2001, CONCEPTS APPL FINITE
[8]  
Crisfield M.A.., 1991, FINITE ELEMENTS SOLU
[9]   On the strain rate sensitivity of high density polyethylene and polypropylenes [J].
Dasari, A ;
Misra, RDK .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 358 (1-2) :356-371
[10]  
de Souza Neto E., 2008, COMPUTATIONAL METHOD