The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field

被引:23
作者
Yetim, A. F. [1 ]
Kovaci, H. [2 ]
Yildiz, F. [1 ]
Bayrak, O. [3 ]
Celik, A. [2 ]
机构
[1] Erzurum Tech Univ, Fac Engn & Architecture, Dept Mech Engn, Erzurum, Turkey
[2] Ataturk Univ, Fac Engn, Dept Mech Engn, Erzurum, Turkey
[3] Erzincan Univ, Dept Mech Engn, Fac Engn, Erzincan, Turkey
关键词
Sliding wear; Plasma nitriding; Plasma post-aging; Magnetic field; Wear Debris; FRICTION BEHAVIOR; TRIBOLOGICAL PROPERTIES; CORROSION; FE16N2;
D O I
10.1016/j.wear.2015.02.035
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Plasma nitriding is an effective surface treatment to improve unsatisfactory wear properties of machine elements. Such machine elements may also subject to magnetic fields in many industrial applications. Therefore, AISI 4140 ferromagnetic steel samples were plasma nitrided. Then, the samples were quenched in water and then post-aged at a temperature of 400 degrees C for 30 and 120 min in plasma environment. Reciprocating wear tests were performed under different oriented DC magnetic field to determine wear behavior of the samples. It was obtained that the magnetic field and its orientation during wear test were the most effective parameters on wear behavior. It was observed that post-aged samples showed better wear resistance and lower friction coefficient values than the merely nitrided samples. Hard Fe16N2 precipitations were formed in the nitrided layer after post-aging treatment and their amount increased with magnetic field. This gave rise to improvement the wear resistance. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:988 / 994
页数:7
相关论文
共 22 条
[1]  
Ajayi O.O., 2001, P INT JOINT TRIB C S
[2]   Effects of post-aging on wear and corrosion properties of nitrided AISI 4140 steel [J].
Alsaran, A. ;
Yildiz, F. ;
Celik, A. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06) :3147-3154
[3]   Effect of post-oxidizing on tribological and corrosion behaviour of plasma nitrided AISI 5140 steel [J].
Alsaran, A ;
Altun, H ;
Karakan, M ;
Çelik, A .
SURFACE & COATINGS TECHNOLOGY, 2004, 176 (03) :344-348
[4]   Sliding wear and friction behavior of CrN-coating in ethanol and oil-ethanol mixture [J].
Bandeira, A. L. ;
Trentin, R. ;
Aguzzoli, C. ;
Maia da Costa, M. E. H. ;
Michels, A. F. ;
Baumvol, I. J. R. ;
Farias, M. C. M. ;
Figueroa, C. A. .
WEAR, 2013, 301 (1-2) :786-794
[5]   Fretting wear of multilayered PVD TiAlCN/TiAlN/TiAl on AISI 4140 steel [J].
Ben Cheikh Larbi, A. ;
Tlili, B. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :1511-1518
[6]   Magnetic properties of α′-FeNx and α"-Fe16N2 nitrides [J].
Bezdicka, P ;
Klarikova, A ;
Paseka, I ;
Zaveta, K .
JOURNAL OF ALLOYS AND COMPOUNDS, 1998, 274 (1-2) :10-17
[7]   Wear of medium carbon steel in the presence of Nd-Fe-B permanent magnetic field [J].
Bi, HY ;
Wang, ZJ .
MATERIALS LETTERS, 2003, 57 (11) :1752-1755
[8]   Oxide film formation in magnetized sliding steel/steel contact - analysis of the contact stress field and film failure mode [J].
Chin, KJ ;
Zaidi, H ;
Mathia, T .
WEAR, 2005, 259 (1-6) :477-481
[9]   Phase identification during aging of some nitrided ferrous materials [J].
Hinojosa, G ;
Oseguera, J ;
Schabes-Retchkiman, PS .
THIN SOLID FILMS, 1999, 349 (1-2) :171-175
[10]   WEAR OF METALS IN A MAGNETIC-FIELD [J].
HIRATSUKA, K ;
SASADA, T .
WEAR, 1993, 160 (01) :119-123