Effect of Sintering Temperature on Electrical Characteristics of Screen-Printed Ag Nanopaste on FR4 Substrate

被引:7
|
作者
Lee, Young-Chul [1 ]
Ahn, Jee-Hyuk [1 ]
Kim, Kwang-Seok [1 ]
Yoon, Jeong-Won [1 ]
Kim, Jong-Woong [2 ]
Kim, Yongil [1 ]
Jung, Seung-Boo [1 ]
机构
[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Suwon 440746, South Korea
[2] Korea Elect Technol Inst, Display Components & Mat Res Ctr, Songnam 463816, South Korea
关键词
High Frequency; Screen Printing; Ag Nanopaste; Sintering Temperature; Direct Printing; SILVER NANOPARTICLES; EPOXY-RESIN;
D O I
10.1166/jnn.2011.4367
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
We investigated the feasibility of a printing technology for Ag circuit formation on a FR4 substrate. A conductive paste containing Ag nanoparticles (73 wt%) of 20-50 nm diameter was screen printed on an FR4 substrate and sintered under a sintering temperature ranging from 100 degrees C to 200 degrees C for 30 min. We carried out the thermal analysis of the Ag nanopaste to confirm the suitability of the set-up conditions. To investigate the sintering degree with various temperatures, fractured cross-sections were observed by field emission scanning electron microscopy (FESEM). For electrical characterization of the printed Ag circuit, a four-point probe method was used to measure the direct current (DC) resistivity, while a network analyzer and Cascade's probe system in the frequency range from 10 MHz to 20 GHz were used to measure the scattering parameters (S-parameter) of the sintered Ag conducting patterns. The resistivity under the application of a DC signal decreased as the temperature increased. The measured S-parameters indicated that the electrical losses decreased as the sintering temperature increased due to the interparticle neck formation after heat treatment at high temperatures.
引用
收藏
页码:5915 / 5920
页数:6
相关论文
共 50 条
  • [41] Effect of sintering aid (CdCl2) on the optical and structural properties of CdZnS screen-printed film
    Kumar, Vipin
    Sharma, Aditya
    Sharma, D. K.
    Dwivedi, D. K.
    OPTIK, 2014, 125 (03): : 1209 - 1211
  • [42] Impact of Substrate and Process on the Electrical Performance of Screen-Printed Nickel Electrodes: Fundamental Mechanism of Ink Film Roughness
    Altay, Bilge Nazli
    Jourdan, Jerome
    Turkani, Vikram S.
    Dietsch, Herve
    Maddipatla, Dinesh
    Pekarovicova, Alexandra
    Fleming, Paul D.
    Atashbar, Massood
    ACS APPLIED ENERGY MATERIALS, 2018, 1 (12): : 7164 - +
  • [43] Effect of firing temperature on electrical and structural characteristics of screen printed TiO2 thick films
    Dighavkar, C. G.
    Patil, A. V.
    Borse, R. Y.
    Patil, S. J.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2009, 3 (10): : 1013 - 1017
  • [44] Effect of electrical aging on field electron emission from screen-printed carbon nanotube film
    Machida, Hironobu
    Honda, Shin-ichi
    Fujii, Shujiro
    Himuro, Katsuya
    Kawai, Hideyasu
    Ishida, Kazuhiro
    Oura, Kenjiro
    Katayama, Mitsuhiro
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2007, 46 (02): : 867 - 869
  • [45] Effect of electrical aging on field electron emission from screen-printed carbon nanotube film
    Machida, Hironobu
    Honda, Shin-Ichi
    Fujii, Shunjiro
    Himuro, Katsuya
    Kawai, Hideyasu
    Ishida, Kazuhiro
    Oura, Kenjiro
    Katayama, Mitsuhiro
    Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 1600, 46 (02): : 867 - 869
  • [46] Effect of Curing Conditions on Electrical Properties of Screen-Printed Fabric Antenna for UHF RFID Tags
    Tu Huating
    Hu Jiyong
    Bai Huan
    Jiang Hongyan
    Hong Hong
    Ding Xin
    Yang Xudong
    Yan Xiong
    AATCC JOURNAL OF RESEARCH, 2019, 6 (Special Issue One) : 24 - 27
  • [47] The Effect of Pre-Stretched Substrate on the Electrical Resistance of Printed Ag Nanowires
    Moon, Yoon Jae
    Kim, Chaewon
    Choi, Eunsik
    Shin, Dong Yeol
    Kang, Kyung-Tae
    NANOMATERIALS, 2023, 13 (04)
  • [48] Development of Highly Stretchable Ag-MWCNT Composite for Screen-Printed Textile Electronics with Improved Mechanical and Electrical Properties
    Janczak, Daniel
    Wojkowska, Katarzyna
    Raczynski, Tomasz
    Zych, Marcin
    Lepak-Kuc, Sandra
    Szalapak, Jerzy
    Nelo, Mikko
    Kadziela, Aleksandra
    Wroblewski, Grzegorz
    Jantunen, Heli
    Jakubowska, Malgorzata
    NANOTECHNOLOGY SCIENCE AND APPLICATIONS, 2024, 17
  • [49] Electrical properties and electrochemical migration characteristics of directly printed Ag patterns with various sintering conditions
    Yoon, Jeong-Won
    Noh, Bo-In
    Jung, Seung-Boo
    MICROELECTRONICS RELIABILITY, 2014, 54 (02) : 410 - 416
  • [50] Effect of bump height on the reliability of ACA flip chip joining with FR4 rigid and polyimide flexible substrate
    Lai, ZH
    Lai, RY
    Persson, K
    Liu, J
    JOURNAL OF ELECTRONICS MANUFACTURING, 1998, 8 (3-4): : 217 - 224