Chip load-responsive optimization of micro-milling of engineering materials

被引：4

作者：

Pansare, V. B. ^{[1
]}

Sharma, S. B. ^{[2
]}

机构：

[1] Govt Engn Coll Aurangabad, Aurangabad, Maharashtra, India

[2] SGGSE & T, Aurangabad, Maharashtra, India

来源：

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | 2016年 / 38卷 / 07期

关键词：

High-speed machining; Micro-milling; Chip load; ACO; Surface roughness; DESIGN OPTIMIZATION; CUTTING PARAMETERS; OPERATIONS; TOOL;

D O I：

10.1007/s40430-015-0399-0

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The miniaturization of machine component is perceived by many as requirement for the future technological development of a broad spectrum of products. Micro-component fabrication requires reliable and repeatable methods, with accurate analysis tools. Surface roughness is one of the most important parameter in machining process. This study presents the results of test done with high-speed face milling tool. Also this research discusses an experimental approach to the development of mathematical model for surface roughness prediction before milling process by using ant colony optimization algorithm. This mathematical model is validated by optimization of cutting parameters for minimum surface roughness.

引用

页码：2063 / 2068

页数：6

共 50 条

[31] Two dimensional vibration-assisted micro-milling: kinematics simulation, chip thickness computation and analysis
Ding, Hui
Chen, Shijin
Cheng, Kai
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 2779 - +
[32] An innovative investigation on chip formation mechanisms in micro-milling using natural diamond and tungsten carbide tools
Niu, Zhichao
Jiao, Feifei
Cheng, Kai
JOURNAL OF MANUFACTURING PROCESSES, 2018, 31 : 382 - 394
[33] Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method
Kuram, Emel
Ozcelik, Babur
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (02) : 228 - 242
[34] Optimization of the process parameters for micro-milling thin-walled micro-parts using advanced algorithms
Peng Wang
Qingshun Bai
Kai Cheng
Liang Zhao
Hui Ding
The International Journal of Advanced Manufacturing Technology, 2022, 121 : 6255 - 6269
[35] Cutting-Force Modeling Study on Vibration-Assisted Micro-Milling of Bone Materials
Shang, Peng
Zhang, Huaiqing
Liu, Xiaopeng
Yang, Zhuang
Liu, Bingfeng
Liu, Teng
MICROMACHINES, 2023, 14 (07)
[36] Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy
Ercetin, Ali
Aslantas, Kubilay
Ozgun, Ozgur
Percin, Mustafa
Chandrashekarappa, Manjunath Patel Gowdru
MICROMACHINES, 2023, 14 (08)
[37] Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718
Lu, Xiaohong
Wang, FuRui
Xue, Liang
Feng, Yixuan
Liang, Steven Y.
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2019, 71 (06) : 787 - 794
[38] Micro milling for polymer materials used in prototyping of microfluidic chip application
Aramcharoen, Ampara
Sean, Shaw Kah Chuan
Kui, Liu
ADVANCES IN ABRASIVE TECHNOLOGY XV, 2012, 565 : 552 - 557
[39] Optimization of Cutting Parameters to Minimize Wall Deformation in Micro-Milling of Thin-Wall Geometries
Hascelik, Ahmet
Aslantas, Kubilay
Yalcin, Bekir
MICROMACHINES, 2025, 16 (03)
[40] Design, optimization and manufacturing of polycrystalline diamond micro- end-mill for micro-milling of GH4169
Chen, Ni
Yuan, Yuan
Guo, Cheng
Zhang, Xinlei
Hao, Xiuqing
Ning, He
DIAMOND AND RELATED MATERIALS, 2020, 108

← 1 2 3 4 5 →