Lap joint of A5083 aluminum alloy and SS400 steel by Friction Stir Welding

被引：112
作者：
Kimapong, K [1 ]
Watanabe, T [1 ]
机构：
[1] Niigata Univ, Dept Engn Mech, Niigata 9502181, Japan
来源：
MATERIALS TRANSACTIONS | 2005年 / 46卷 / 04期
关键词：
lap joint; aluminum alloy; steel; friction stir welding; tensile shear strength;
D O I：
10.2320/matertrans.46.835
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A lap joint of A5083 aluminum alloy and SS400 steel was produced by Friction Stir Welding (FSW) using the various process parameters such as rotational speed, traverse speed and pin depth. The variations of welding parameters produced various characteristic interfaces and had conspicuous influences on the joint properties. Increasing the rotational speed decreased the shear load of the joint due to producing a thick FeAl3 intermetallic compound (IMC) at the interface. When traverse speed increased, the shear load increased because IMC thickness at the interface decreased, however, when the speed was so high, an incomplete interface was formed. Increasing the pin depth produced a thick FeAl3 IMC phase and an incomplete interface that directly deteriorated the shear load of the joint.
引用
收藏
页码：835 / 841
页数：7
相关论文
共 15 条
[1]  
*ASM INT, 1990, MET HDB, V9, P147
[2]   Low-temperature friction-stir welding of 2024 aluminum [J].
Benavides, S ;
Li, Y ;
Murr, LE ;
Brown, D ;
McClure, JC .
SCRIPTA MATERIALIA, 1999, 41 (08) :809-815
[3]  
BRANES TA, 2000, J MATER PROCESS TECH, V99, P62
[4]   Loining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding [J].
Chen, CM ;
Kovacevic, R .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (11) :1205-1214
[5]  
ELREFAEY A, 2003, NAT M JWS, V73, P66
[6]   Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys [J].
Jata, KV ;
Semiatin, SL .
SCRIPTA MATERIALIA, 2000, 43 (08) :743-749
[7]   Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment [J].
Kobayashi, S ;
Yakou, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2) :44-53
[8]   Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum [J].
Li, Y ;
Murr, LE ;
McClure, JC .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 271 (1-2) :213-223
[9]   Microstructural aspects of the friction-stir welding of 6061-T6 aluminum [J].
Liu, G ;
Murr, LE ;
Niou, CS ;
McClure, JC ;
Vega, FR .
SCRIPTA MATERIALIA, 1997, 37 (03) :355-361
[10]   Structure, properties, and residual stress of 304L stainless steel friction stir welds [J].
Reynolds, AP ;
Tang, W ;
Gnaupel-Herold, T ;
Prask, H .
SCRIPTA MATERIALIA, 2003, 48 (09) :1289-1294
12