Reactive plasma-aided RF sputtering deposition of hydroxyapatite bio-implant coatings

被引:26
|
作者
Long, Jidong
Sim, Lina
Xu, Shuyan
Ostrikov, Kostya [1 ]
机构
[1] Univ Sydney, Sch Phys, Plasma Nanosci Complex Syst, Sydney, NSW 2006, Australia
[2] Nanyang Technol Univ, NIE, Plasma Sources & Applicat Ctr, Singapore 637616, Singapore
[3] Nanyang Technol Univ, Inst Adv Studies, Singapore 637616, Singapore
关键词
calcium phosphate; crystallization; hydroxyapatite; optical emission spectroscopy; RF sputtering deposition; simulated body fluid;
D O I
10.1002/cvde.200606550
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
The plasma-assisted RF sputtering deposition of a biocompatible, functionally graded calcium phosphate bioceramic on a Ti6Al4 V orthopedic alloy is reported. The chemical composition and presence of hydroxyapatite (HA), CaTiO3, and CaO mineral phases can be effectively controlled by the process parameters. At higher DC biases, the ratio [Ca]/[P] and the amount of CaO increase, whereas the HA content decreases. Optical emission spectroscopy suggests that CaO+ is the dominant species that responds to negative DC bias and controls calcium content. Biocompatibility tests in simulated body fluid confirm a positive biomimetic response evidenced by in-growth of an apatite layer after 24 h of immersion.
引用
收藏
页码:299 / 306
页数:8
相关论文
共 50 条
  • [21] Preparation and Characterisation of Cattle Bone Based Hydroxyapatite Implant Coatings Using Electrostatic Spray Deposition
    Baru, Muhammadsarn-ii
    Chaijaruwanich, Anirut
    Nakkiew, Wasawat
    MATERIALS SCIENCE AND TECHNOLOGY VII, 2013, 545 : 47 - +
  • [22] Deposition, nanostructure and phase composition of suspension plasma-sprayed hydroxyapatite coatings
    Xu, Haifeng
    Geng, Xin
    Liu, Guanxiong
    Xiao, Jinkun
    Li, Dayu
    Zhang, Yanjun
    Zhu, Peizhi
    Zhang, Chao
    CERAMICS INTERNATIONAL, 2016, 42 (07) : 8684 - 8690
  • [23] Deposition of Biocompatible Coatings from the Ablation Plasma Produced by the Irradiation of the Hydroxyapatite Target with Powerful Ion Beams
    Tatyana, Volokitina
    Sergei, Tverdokhlebov
    Gennadiy, Remnev
    Alexander, Pushkarev
    Ilya, Khaylov
    NANOMATERIALS FOR STRUCTURAL, FUNCTIONAL AND BIOMEDICAL APPLICATIONS, 2014, 872 : 227 - 230
  • [25] Modification of polylactic acid surface using RF plasma discharge with sputter deposition of a hydroxyapatite target for increased biocompatibility
    Tverdokhlebov, S. I.
    Bolbasov, E. N.
    Shesterikov, E. V.
    Antonova, L. V.
    Golovkin, A. S.
    Matveeva, V. G.
    Petlin, D. G.
    Anissimov, Y. G.
    APPLIED SURFACE SCIENCE, 2015, 329 : 32 - 39
  • [26] Magnesium and fluoride doped hydroxyapatite coatings grown by pulsed laser deposition for promoting titanium implant cytocompatibility
    Cao, Jinxing
    Lian, Ruizhe
    Jiang, Xiaohong
    APPLIED SURFACE SCIENCE, 2020, 515
  • [27] Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension plasma spraying: Effects of torch speed
    Rocnakova, I
    Slamecka, K.
    Montufar, E. B.
    Remesova, M.
    Dyckova, L.
    Brinek, A.
    Jech, D.
    Dvorak, K.
    Celko, L.
    Kaiser, J.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (16) : 5489 - 5496
  • [28] The effect on bone growth enhancement of implant coatings with hydroxyapatite and collagen deposited electrochemically and by plasma spray
    Daugaard, Henrik
    Elmengaard, Brian
    Bechtold, Joan E.
    Jensen, Thomas
    Soballe, Kjeld
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2010, 92A (03) : 913 - 921
  • [29] Deposition of titanium nitride and hydroxyapatite-based biocompatible composite by reactive plasma spraying
    Rosu, Radu Alexandru
    Serban, Viorel-Aurel
    Bucur, Alexandra Ioana
    Dragos, Utu
    APPLIED SURFACE SCIENCE, 2012, 258 (08) : 3871 - 3876
  • [30] Growth of Crystalline Hydroxyapatite Thin Films at Room Temperature by Tuning the Energy of the RF-Magnetron Sputtering Plasma
    Lopez, Elvis O.
    Mello, Alexandre
    Sendao, Henrique
    Costa, Lilian T.
    Rossi, Andre L.
    Ospina, Rogelio O.
    Borghi, Fabricio F.
    Silva Filho, Jose G.
    Rossi, Alexandre M.
    ACS APPLIED MATERIALS & INTERFACES, 2013, 5 (19) : 9435 - 9445