Low temperature co-sintering of tungsten alloy/steel composite structure

被引：12

作者：

Liu, Wensheng ^{[1
]}

Zhang, Lei ^{[1
]}

Ma, Yunzhu ^{[1
]}

Cai, Qingshan ^{[1
]}

Zhu, Wentan ^{[1
]}

Wang, Ruochong ^{[1
]}

Wen, Zhongliu ^{[2
]}

机构：

[1] Cent South Univ, Natl Key Lab Sci & Technol Natl Def High Strength, Changsha 410083, Peoples R China

[2] Foshan Univ, Sch Mat Sci & Energy Engn, Foshan 528000, Peoples R China

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2020年 / 90卷

基金：

中国国家自然科学基金;

关键词：

Tungsten alloy; Steel; Composite structure; Co-sintering; MICROSTRUCTURAL EVOLUTION; DENSIFICATION;

D O I：

10.1016/j.ijrmhm.2020.105224

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

90W-Ni-Cu-Sn alloy/steel composite structure has been fabricated by co-sintering process at temperature as low as 1200 degrees C for 3 h using hot isotactic pressing (HIP). Microstructural studies revealed that a rich Ni, Cu and Sn transition layer was formed at the co-sintering interface due to the liquid gamma-(Ni, Cu, Sn) migration, and no intermetallic compounds or other brittle phases were found at the interface. The shear tests indicated that the average shear strength of the co-sintered 90W-Ni-Cu-Sn/steel joint could reach 382.9 MPa. This successful attempt provides a new idea for the fabrication of tungsten alloy/steel composite structure component.

引用

页数：4

共 13 条

[1] Investigation on the diffusion bonding of tungsten and EUROFER97 [J].

Basuki, Widodo Widjaja ;

Aktaa, Jarir .

JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) :524-527

[2] Rational design of composite interlayer for diffusion bonding of tungsten-steel joints [J].

Cai, Qingshan ;

Zhu, Wentan ;

Ma, Yunzhu ;

Liu, Wensheng ;

Pang, Xinkuan ;

Liang, Chaoping .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 70 :155-161

[3] Interface formation and bond strength in 3Y-TZP/Cr composite bilayers produced by sinter-joining [J].

Dourandish, M. ;

Simchi, A. ;

Hokamoto, K. ;

Tanaka, S. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (03) :449-453

[4] Mathematical modeling of liquid phase migration in solid-liquid mixtures: Application to the sintering of functionally graded WC-Co composites [J].

Fan, Peng ;

Fang, Zhigang Zak ;

Sohn, H. Y. .

ACTA MATERIALIA, 2007, 55 (09) :3111-3119

[5] An investigation of the densification and microstructural evolution of M2/316L stepwise graded composite during co-sintering [J].

Firouzdor, V. ;

Simchi, A. ;

Kokabi, A. H. .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (01) :55-63

[6] Fabrication of a He-cooled divertor module for DEMO reactor [J].

Gervash, A. ;

Giniyatulin, R. ;

Ihli, T. ;

Krauss, W. ;

Makhankov, A. ;

Mazul, I. ;

Norajitra, P. ;

Yablokov, N. .

JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (SPEC. ISS.) :1472-1475

[7] Study on weldability window and interface morphology of steel tube and tungsten alloy rod welded by explosive welding [J].

Ren Baoxiang ;

Tao Gang ;

Wen Peng ;

Du Changxing .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 84

[8] Densification and microstructural evolution during co-sintering of Ni-base superalloy powders [J].

Simchi, A. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (08) :2549-2557

[9] Effect of holding time on the microstructure and strength of tungsten/steel joints by HIP diffusion bonded using a Cu interlayer [J].

Zhang, Jiajia ;

Xie, Donghua ;

Li, Qishou ;

Jiang, Chunli ;

Li, Qiang .

MATERIALS LETTERS, 2020, 261

[10] Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer [J].

Zhong, Zhihong ;

Jung, Hun-chea ;

Hinoki, Tatsuya ;

Kohyama, Akira .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (13) :1805-1810

← 1 2 →