Cryogenic deposition of carbon nitride thin solid films by reactive magnetron sputtering;: suppression of the chemical desorption processes

被引:15
|
作者
Neidhardt, J [1 ]
Högberg, H [1 ]
Hultman, L [1 ]
机构
[1] Linkoping Univ, Dept Phys, Thin Film Phys Div, IFM, S-58183 Linkoping, Sweden
基金
欧洲研究理事会;
关键词
fullerene-like carbon nitride; magnetron sputtering; cryogenic synthesis;
D O I
10.1016/j.tsf.2004.09.055
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nanostructured fullerene-like carbon nitride (FL CN,) is commonly grown by reactive magnetron sputtering of carbon in a nitrogencontaining atmosphere. The film structure formation for this technique is presumably due to the existence of preformed molecular CxNy (x,y <= 2) species in the deposition flux, which act as growth templates and enhance the selectivity of chemical desorption processes. In the present study, the extent of the desorption processes and the implications on the resulting film have been investigated in detail, addressing in particular the structure evolution and the origin of the incorporated nitrogen. This was studied by varying the N-2-fraction in the discharge from 0 to 1 and the substrate temperature from 600 degrees C (873 K) down to minus 130 degrees C (143 K). The results show that the incorporation rate of carbon and nitrogen into the film increases substantially with an increased N-2-content in the plasma and decreasing substrate temperature, thus indicating that the chemistry and magnitude of the arriving flux is substantially altered with the N-2-fraction in the discharge. It is concluded that the chemically activated desorption in conjunction with the varying chemistry of the film-forming flux affects the sensitive structural balance, determined by incorporation and desorption of film forming CxNy (x,y <= 2) species. (c) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:34 / 41
页数:8
相关论文
共 50 条
  • [1] Deposition of molybdenum nitride thin films by rf reactive magnetron sputtering
    Anitha, VP
    Major, S
    Chandrashekharam, D
    Bhatnagar, M
    SURFACE & COATINGS TECHNOLOGY, 1996, 79 (1-3): : 50 - 54
  • [2] Characterisation of carbon nitride thin films prepared by reactive magnetron sputtering
    Fernandez, A
    Sanchez-Lopez, JC
    Lassaletta, G
    CARBON, 1998, 36 (5-6) : 761 - 764
  • [3] Characterisation of carbon nitride thin films prepared by reactive magnetron sputtering
    Fernández, A
    Sánchez-López, JC
    Lassaletta, G
    FULLERENES AND CARBON BASED MATERIALS, 1998, 68 : 761 - 764
  • [4] Characterisation of carbon nitride thin films prepared by reactive magnetron sputtering
    Fernandez, A.
    Sanchez-Lopez, J.C.
    Lassaletta, G.
    Carbon, 36 (5-6): : 761 - 764
  • [5] Carbon nitride thin films prepared by reactive rf magnetron sputtering
    Logothetidis, S
    Lefakis, H
    Gioti, M
    FULLERENES AND CARBON BASED MATERIALS, 1998, 68 : 757 - 760
  • [6] Carbon nitride thin films prepared by reactive rf magnetron sputtering
    Logothetidis, S
    Lefakis, H
    Gioti, M
    CARBON, 1998, 36 (5-6) : 757 - 760
  • [7] Deposition of thermally stable tungsten nitride thin films by reactive magnetron sputtering
    Abdelhameed, A. H.
    Jacob, W.
    SURFACE & COATINGS TECHNOLOGY, 2019, 375 : 701 - 707
  • [8] Deposition of titanium nitride thin films onto Silicon by RF Reactive magnetron sputtering
    Saoula, N.
    Henda, K.
    Kesri, R.
    THIN FILMS AND POROUS MATERIALS, 2009, 609 : 117 - +
  • [9] Deposition of carbon nitride films by ionised magnetron sputtering
    Kusano, Y
    Christou, C
    Barber, ZH
    Evetts, JE
    Hutchings, IM
    THIN SOLID FILMS, 1999, 355 : 117 - 121
  • [10] Deposition of carbon nitride films by ionized magnetron sputtering
    Kusano, Y.
    Christou, C.
    Barber, Z.H.
    Evetts, J.E.
    Hutchings, I.M.
    Thin Solid Films, 1999, 355 : 117 - 121