Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy

被引：76
作者：
Chen Song-yi [1 ]
Chen Kang-hua [1 ]
Peng Guo-sheng [1 ]
Liang Xin [1 ]
Chen Xue-hai [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012年 / 22卷 / 01期
基金：
中国国家自然科学基金;
关键词：
7085 aluminum alloy; quenching rate; microstructure; stress corrosion cracking; ZN-MG ALLOY; HYDROGEN EMBRITTLEMENT; SCC-RESISTANCE; STRENGTH; AA7050; RETROGRESSION; TOUGHNESS;
D O I：
10.1016/S1003-6326(11)61138-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of quenching rate on microstructure and stress corrosion cracking (SCC) of 7085 aluminum alloy was investigated by tensile test, slow strain rate test (SSRT), combined with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electrochemical test. The results show that with decreasing the quenching rate, the size and inter-particle distance of the grain boundary precipitates as well as precipitation free zone width increase, but the copper content of grain boundary precipitates decreases. The SCC resistance of the samples increases first and then decreases, which is attributed to the copper content, size and distribution of grain boundary precipitates.
引用
收藏
页码：47 / 52
页数：6
相关论文
共 50 条
  • [41] Effect of heat treatment on hot deformation behavior and microstructure evolution of 7085 aluminum alloy
    Chen, Songyi
    Chen, Kanghua
    Peng, Guosheng
    Chen, Xuehai
    Ceng, Qinghua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 537 : 338 - 345
  • [42] Stress corrosion cracking of an aluminum alloy used in external fixation devices
    Cartner, Jacob L.
    Haggard, Warren O.
    Ong, Joo L.
    Bumgardner, Joel D.
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2008, 86B (02) : 430 - 437
  • [43] Stress corrosion cracking characteristics of aluminum alloy specimens with different thicknesses
    Liu, Huicong, 1600, Editorial Office of Chinese Journal of Rare Metals (38): : 581 - 588
  • [44] Effect of Gd on microstructure and stress corrosion cracking of the AZ91-extruded magnesium alloy
    Song, Yulai
    Liu, Qing
    Wang, Haiyang
    Zhu, Xianyong
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (07): : 1189 - 1200
  • [45] Effect of aging on fracture toughness and stress corrosion cracking resistance of forged 7475 aluminum alloy
    Li, Hongying
    Geng, Jinfeng
    Dong, Xianjuan
    Wang, Changjian
    Zheng, Feng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2007, 22 (02): : 191 - 195
  • [46] Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review
    Rao, A. C. Umamaheshwer
    Vasu, V.
    Govindaraju, M.
    Srinadh, K. V. Sai
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (06) : 1447 - 1471
  • [47] CORRELATION BETWEEN MICROSTRUCTURE AND STRESS CORROSION CRACKING SUSCEPTIBILITY OF 2091 ALLOY
    LJ Benshun Harbin Institute of Technology
    Acta Metallurgica Sinica(English Edition), 1992, (12) : 483 - 488
  • [48] Effect of Heating Rates and Solid Solution Time on Microstructure and Properties of Hot-Pressed 7085 Aluminum Alloy
    Zhou, Qingshan
    Han, Tian
    Yin, Siyuan
    Tan, Cheng
    Xu, Xiaojing
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2024, 60 (05) : 981 - 994
  • [49] Effect of Sc on the Hot Cracking Properties of 7xxx Aluminum Alloy and the Microstructure of Squeeze Castings
    Xu, Yongtao
    Zhang, Zhifeng
    Gao, Zhihua
    Bai, Yuelong
    Zhao, Purui
    Mao, Weimin
    MATERIALS, 2021, 14 (22)
  • [50] Modifying the microstructure and stress distribution of crossover Al-Mg-Zn alloy for regulating stress corrosion cracking via retrogression and re-aging treatment
    Zhang, Zhen
    Hao, Zhifei
    Wang, Hongbin
    Zhang, Di
    Zhang, Jishan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 884
12345