Effect of Ca-addition on Hot Deformation Behavior and Workability of Mg-Gd-Y-Zn-Zr Alloy

被引：0

作者：

Wang Yujiao ^{[1
]}

Jiang Haitao ^{[1
]}

Liu Chaomin ^{[1
]}

Zhang Yun ^{[1
]}

Guo Wenqi ^{[1
]}

Kang Qiang ^{[1
]}

Xu Zhe ^{[2
]}

Wang Panpan ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Beijing 100083, Peoples R China

[2] China Inst Marine Technol & Econ, Beijing 100081, Peoples R China

来源：

RARE METAL MATERIALS AND ENGINEERING | 2020年 / 49卷 / 05期

关键词：

Mg-Gd-Y-Zn-Zr; Ca addition; hot deformation behavior; constitutive equation; processing map; PROCESSING MAPS; MECHANICAL-PROPERTIES; MAGNESIUM; MICROSTRUCTURE;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Effect of Ca on hot deformation behavior and workability of Mg-Gd-Y-Zn-Zr alloy were investigated by Gleeble 3500 thermal simulation tester conducted at a temperature ranging from 573 K to 723 K and strain rate varying from 0.001 s(-1) to 1 s(-1) . It is indicated that the addition of Ca increased the flow stress and hot deformation active energy, widened the range of processing stable zone and the optimal processing zone, but decreased the maximum power dissipation efficiency, and inhibited the dynamic recrystallization. Combined with the microstructure after thermal compression which was analyzed by laser confocal microscopy, the accuracy of the processing map was verified. The optimized hot processing parameters of Mg-Gd-Y-Zn-Zr were formulated, namely strain rate ranging from 0.001 s(-1) to 0.01 s(-1), temperature ranging from 623 K to 723 K. Depending on the optimum processing parameters, an isothermal forged magnesium alloy with good quality and no deformation defects was fabricated.

引用

页码：1650 / 1656

页数：7

共 19 条

[1]

Chu ZB, 2018, RARE METAL MAT ENG, V47, P124

[2] Microstructure, mechanical properties, creep and corrosion resistance of Mg-Gd-Y-Zr(-Ca) alloys [J].

He, Shangming ;

Zeng, Xiaoqin ;

Peng, Liming ;

Guo, Xinwu ;

Chang, Jianwei ;

Ding, Wenjiang .

2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 :101-+

[3]

Jin X. F., 2015, THESIS

[4] The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys [J].

Koike, J ;

Kobayashi, T ;

Mukai, T ;

Watanabe, H ;

Suzuki, M ;

Maruyama, K ;

Higashi, K .

ACTA MATERIALIA, 2003, 51 (07) :2055-2065

[5] The effect of 0.5 wt.% Ca addition on the hot compressive characteristics and processing maps of the cast and extruded Mg-3Al-1Zn alloys [J].

Kwak, T. Y. ;

Lim, H. K. ;

Kim, W. J. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 658 :157-169

[6] Hot compression behavior of the ignition- resistant Mg-5Y-2.5Zn-1.2Ca alloy with long-period stacking ordered structures [J].

Kwak, T. Y. ;

Lim, H. K. ;

Kim, W. J. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 632 :417-428

[7]

Li H Z, 2010, MATER DESIGN, V528, P154

[8]

[李康宁 Li Kangning], 2017, [材料科学与工艺, Material Science and Technology], V25, P66

[9]

Li Li, 2011, MAT SCI ENG A-STRUCT, V528, P1396

[10] Texture and microstructure development during hot deformation of ME20 magnesium alloy: Experiments and simulations [J].

Li, X. ;

Al-Samman, T. ;

Mu, S. ;

Gottstein, G. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (27) :7915-7925

← 1 2 →