Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends

被引：8

作者：

Agrawal, Pankaj ^{[1
]}

Araujo, Edcleide M. ^{[1
]}

Melo, Tomas J. A. ^{[1
]}

机构：

[1] Univ Fed Campina Grande, Dept Mat Engn, BR-58109970 Campina Grande, PB, Brazil

来源：

JOURNAL OF MATERIALS SCIENCE | 2008年 / 43卷 / 13期

关键词：

D O I：

10.1007/s10853-008-2661-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this work, the effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends was investigated. The blends were prepared by two processing methods: Injection and Extrusion followed by Injection. The compatibilizers used were polyethylene grafted with acrylic acid (PEgAA) and polyethylene grafted with maleic anhydride (PEgMA). The results showed that in both processing methods the impact strength and elongation at break of the compatibilized blends were greater than those of the uncompatibilized ones. For the blends prepared by injection, the impact strength of PA6/PEgMA/LDPE blend was greater than that of PA6/PEgAA/LDPE blend. For the blends prepared by extrusion followed by injection, the impact strength of the PA6/PEgAA/LDPE blend was greater than that of PA6/PEgMA/LDPE blend. SEM analysis showed that the morphology of the PA6/PEgAA/LDPE blend prepared by extrusion followed by injection was more stable than that of the same blend prepared only by injection.

引用

页码：4443 / 4449

页数：7

共 26 条

[1] Effect of different polypropylenes and compatibilizers on the rheological, mechanical and morphological properties of nylon 6/PP blends [J].

Agrawal, Pankaj ;

Oliveira, Silvia I. ;

Araujo, E. M. ;

Melo, Tomas J. A. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (13) :5007-5012

[2] Morphological, mechanical and thermal properties of nylon 6/ABS blends using glycidyl methacrylate-methyl methacrylate copolymers [J].

Araújo, EM ;

Hage, E ;

Carvalho, AJF .

JOURNAL OF MATERIALS SCIENCE, 2005, 40 (16) :4239-4246

[3]

Bassani Adriane, 2005, Polímeros, V15, P176, DOI 10.1590/S0104-14282005000300007

[4] Reactive compatibilizer precursors for LDPE/PA6 blends. III: ethylene-glycidylmethacrylate copolymer [J].

Chiono, V ;

Filippi, S ;

Yordanov, H ;

Minkova, L ;

Magagnini, P .

POLYMER, 2003, 44 (08) :2423-2432

[5] KINETIC-STUDIES AND PROCESS ANALYSIS OF THE REACTIVE COMPATIBILIZATION OF NYLON-6 POLYPROPYLENE BLENDS [J].

DAGLI, SS ;

XANTHOS, M ;

BIESENBERGER, JA .

POLYMER ENGINEERING AND SCIENCE, 1994, 34 (23) :1720-1730

[6] On the compatibility of the IPP/PA6/EPDM blends with and without functionalized IPPI. Thermo-oxidative behaviour [J].

Darie, RN ;

Brebu, M ;

Vasile, C ;

Kozlowski, M .

POLYMER DEGRADATION AND STABILITY, 2003, 80 (03) :551-566

[7]

Deanin R.D., 1999, POLYM BLENDS ALLOYS

[8] Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends [J].

Fellahi, S ;

Favis, BD ;

Fisa, B .

POLYMER, 1996, 37 (13) :2615-2626

[9]

Filippi S, 2002, MACROMOL CHEM PHYSIC, V203, P1512, DOI 10.1002/1521-3935(200207)203:10/11<1512::AID-MACP1512>3.0.CO

[10]

2-G

← 1 2 3 →