Kinetic Studies of Iron Ore-Coal Composite Pellet Reduction by TG-DTA

An attempt has been made to study the effect of coal quality on the reduction kinetics of iron ore-coal composite pellets under non-isothermal condition in inert atmosphere. During non-isothermal reduction of composite pellets, it is observed that (i) reduction rate of iron oxide increases with increasing temperature, (ii) reduction rate increases with increase in porosity of pellets and (iii) the computed values of activation energy (E) are lower during the initial stage of reduction (0.86-8.82 kJ mol(-1)) than those in the later stages of reduction (12.37-38.32 kJ mol(-1)). These values indicate that the initial stage reduction is controlled by gaseous diffusion mechanism and at final stage, mixed control reaction mechanism (i.e., both gaseous-diffusion and chemical reaction) is the rate controlling step. The present investigation aims at to assess the effect of Fe-tot/C-fix ratio in pellet, volatile matter in coal, and temperature on the reduction kinetics of iron ore-coal composite pellets using simultaneous thermogravimetric and differential thermal analyser (TG-DTA).