EMI filter design based on the separated electromagnetic interference in switched mode power supplies

被引:3
作者
Yalcin, Samet [1 ]
Ozen, Sukru [2 ]
Helhel, Selcuk [2 ]
机构
[1] Suleyman Demirel Univ, Fac Technol, Dept Elect & Elect Engn, Isparta, Turkey
[2] Akdeniz Univ, Fac Engn, Dept Elect & Elect Engn, Antalya, Turkey
关键词
Conducted emission; electromagnetic compatibility; electromagnetic interference filter; noise separator; switch mode power supply; COMMON-MODE; NOISE SEPARATOR;
D O I
10.3906/elk-1601-319
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
Usage of switch mode power supplies (SMPS) has been increased tremendously in recent years due to their advantages compared to conventional ones. In spite of their advantages, SMPSs cause conducted and radiated emissions due to the fact that they switch on and off at specific frequencies. Electromagnetic interference (EMI) filters are mostly preferred equipment for the reduction of conducted emission for coupled circuits. Improved EMI filter in the literature to suppress both common and differential mode noises sourced by ATX (a sample of SMPS) power supply has been proposed. A proposed filter was designed by use of AWR Microwave Office and MATLAB. The power supply was tested according to CISPR22 and it was observed that it has 30 dB higher noise level compared to the limit. A new improvement has also been proposed in order to separate resultant EMI into its common and differential modes for proper EMI filter design. The designed filter, by considering common and differential modes, suppresses those noises by 37 dB.
引用
收藏
页码:3033 / 3043
页数:11
相关论文
共 31 条
[1]  
[Anonymous], 2001, NONLINEAR PHENOMENA
[2]  
Basyigit IB, 2011, P 30 URSI GEN ASS SC, P1
[3]  
Basyigit IB, 2015, 2015 9TH INTERNATIONAL CONFERENCE ON ELECTRICAL AND ELECTRONICS ENGINEERING (ELECO), P328, DOI 10.1109/ELECO.2015.7394636
[4]   COMBINED DIFFERENTIAL AND COMMON-MODE SCATTERING PARAMETERS - THEORY AND SIMULATION [J].
BOCKELMAN, DE ;
EISENSTADT, WR .
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1995, 43 (07) :1530-1539
[5]  
Brown M., 2012, Practical Switching Power Supply Design
[6]   Devices for the separation of the common and differential mode noise: Design and realization [J].
Caponet, MC ;
Profumo, F .
APEC 2002: SEVENTEENTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1 AND 23, 2002, :100-105
[7]  
Caponet MC, 2001, IEEE POWER ELECTRON, P1383, DOI 10.1109/PESC.2001.954313
[8]  
Chang XL, 2014, APPL POWER ELECT CO, P3392, DOI 10.1109/APEC.2014.6803794
[9]  
Chen PS, 2006, IEEE IND APPLIC SOC, P1209
[10]   Optimization of resistive loading of EMI/EMC near field probe [J].
Çömlekçi, S ;
Özen, S ;
Köklükaya, E .
ROBOTICS AND AUTONOMOUS SYSTEMS, 2004, 49 (3-4) :245-251