Degradation of 4,6-dinitro-o-cresol from water by anodic oxidation with a boron-doped diamond electrode

Anodic oxidation of 4,6-dinitro-o-cresol (DNOC) has been studied in a cell of 100 ml with a boron-doped diamond anode and a graphite cathode, both of 3-cm(2) area. Solutions containing up to approximately 240 mg1(-1) of compound in the pH range 2.0-12.0 have been treated at 100, 300 and 450 mA between 15 and 50 degrees C. Total mineralization is always achieved due to the great amount of hydroxyl radical (*OH) produced as oxidant on the anode surface. Total organic carbon is more rapidly removed in acid medium, being the optimum pH 3.0. The degradation rate increases when temperature, current and DNOC concentration increase. However, at 100 mA depollution becomes more effective from 71 mg1(-1) of initial pollutant. A pseudo first-order kinetics for DNOC decay is always found by reversed-phase chromatography, with a rate constant practically independent of pH, as expected if the same electroactive species is oxidized in all media. Ion-exclusion chromatography allowed the detection of oxalic acid as the ultimate carboxylic acid. The mineralization process leads to the complete release of NO3- ions from the destruction of nitroderivative intermediates. These products are oxidized simultaneously with accumulated oxalic acid up to the end of electrolyses. Comparative treatment of the same solutions with a Pt anode yields a quite poor depollution because of the generation of much lower amounts of reactive *OH on its surface. (c) 2005 Elsevier Ltd. All rights reserved.