Influence of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite

被引：1
|
作者：
DijuSamuel, G. [1 ]
Dhas, J. Edwin Raja [2 ]
机构：
[1] Noorul Islam Univ, Dept Aeronaut Engn, Kumaracoil 629180, India
[2] Noorul Islam Univ, Dept Automobile Engn, Kumaracoil 629180, India
来源：
1ST INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AEROSPACE ENGINEERING (ICRAAE-2017) | 2017年 / 247卷
关键词：
AA6061; SEM; EDAX; XRD; FSW; Hardness; Tensile Strength;
D O I：
10.1088/1757-899X/247/1/012015
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This paper focus on impact of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite. For fabrication of metal matrix composite AA6061 is used as matrix and activated carbon is used as reinforcement and it is casted using modified stir casting technique. After casting metal matrix composite has undergone various microstructure tests like SEM, EDAX and XRD. FSW is carried out in this metal matrix composite by choosing various tool pin profile like square, round, Threaded round, hexagon and taper. The quality of welded plates is measured in terms of ultimate tensile strength and hardness.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] A Phenomenological Model for Tool Wear in Friction Stir Welding of Metal Matrix Composites
    Tracie J. Prater
    Alvin M. Strauss
    George E. Cook
    Brian T. Gibson
    Chase D. Cox
    Metallurgical and Materials Transactions A, 2013, 44 : 3757 - 3764
  • [32] A Phenomenological Model for Tool Wear in Friction Stir Welding of Metal Matrix Composites
    Prater, Tracie J.
    Strauss, Alvin M.
    Cook, George E.
    Gibson, Brian T.
    Cox, Chase D.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (08): : 3757 - 3764
  • [33] Improving the friction stir welding tool life for joining the metal matrix composites
    Sattar S. Emamian
    Mokhtar Awang
    Farazila Yusof
    Mohammadnassir Sheikholeslam
    Mehrshad Mehrpouya
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3217 - 3227
  • [34] Influence of tool geometry in friction stir welding
    Kumar, K.
    Kailas, Satish V.
    Srivatsan, T. S.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (02) : 189 - 195
  • [35] Influence of Shoulder Geometry and Coating of the Tool on the Friction Stir Welding of Aluminium Alloy Plates
    Casalino, Giuseppe
    Campanelli, Sabina
    Mortello, Michelangelo
    24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 1541 - 1548
  • [36] Friction Stir Welding of Aluminum Metal Matrix Composite Containers for Electric Components
    Pakkanen, Jukka
    Huetter, Andreas
    Poletti, Cecilia
    Enzinger, Norbert
    Sommitsch, Christof
    Niu, Ji Tai
    MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 1445 - 1451
  • [37] Friction stir welding of the butt joints reinforced by oxide particles of the composite materials based on aluminium
    Feofanov A.N.
    Ochinnikov V.V.
    Gubin A.M.
    Welding International, 2020, 34 (10-12): : 496 - 501
  • [38] Microstructure analysis of amorphous reinforced aluminum matrix composite prepared by friction stir welding
    Liu, Peng
    Shi, Qingyu
    Huo, Yushuang
    Zhang, Yuanbin
    Li, Yang
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (11): : 53 - 56
  • [39] Tool durability maps for friction stir welding of an aluminium alloy
    DebRoy, T.
    De, A.
    Bhadeshia, H. K. D. H.
    Manvatkar, V. D.
    Arora, A.
    PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2012, 468 (2147): : 3552 - 3570
  • [40] Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite
    Wang, Suyu
    Xu, Yuxin
    Wang, Wenquan
    Tian, Yingtao
    Zhang, Xinge
    Huang, Hu
    Zheng, Daoyou
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 83 : 729 - 741
12345