Influence of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite

被引：1
|
作者：
DijuSamuel, G. [1 ]
Dhas, J. Edwin Raja [2 ]
机构：
[1] Noorul Islam Univ, Dept Aeronaut Engn, Kumaracoil 629180, India
[2] Noorul Islam Univ, Dept Automobile Engn, Kumaracoil 629180, India
来源：
1ST INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AEROSPACE ENGINEERING (ICRAAE-2017) | 2017年 / 247卷
关键词：
AA6061; SEM; EDAX; XRD; FSW; Hardness; Tensile Strength;
D O I：
10.1088/1757-899X/247/1/012015
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This paper focus on impact of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite. For fabrication of metal matrix composite AA6061 is used as matrix and activated carbon is used as reinforcement and it is casted using modified stir casting technique. After casting metal matrix composite has undergone various microstructure tests like SEM, EDAX and XRD. FSW is carried out in this metal matrix composite by choosing various tool pin profile like square, round, Threaded round, hexagon and taper. The quality of welded plates is measured in terms of ultimate tensile strength and hardness.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] WELDABILITY OF METAL MATRIX COMPOSITE PLATES BY FRICTION STIR WELDING AT LOW WELDING PARAMETERS
    Bozkurt, Yahya
    MATERIALI IN TEHNOLOGIJE, 2011, 45 (05): : 407 - 412
  • [22] Influence of tool pin design on properties of dissimilar copper to aluminum friction stir welding
    Mehta, Kush P.
    Badheka, Vishvesh J.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (01) : 36 - 54
  • [23] Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding
    Javad Marzbanrad
    Mostafa Akbari
    Parviz Asadi
    Samad Safaee
    Metallurgical and Materials Transactions B, 2014, 45 : 1887 - 1894
  • [24] Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding
    Marzbanrad, Javad
    Akbari, Mostafa
    Asadi, Parviz
    Safaee, Samad
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1887 - 1894
  • [25] Influence of the pin shape of the tool during friction stir welding on the process output parameters
    Akhunova, A. Kh
    Imayev, M. F.
    Valeeva, A. Kh
    LETTERS ON MATERIALS, 2019, 9 (04): : 456 - 459
  • [26] Experimental investigation on the effect of tool rotation speed on stir cast friction stir welded aluminium hybrid metal matrix composite
    Srinivasan, R.
    Vesvanth, M.
    Sivasuriya, Kv.
    Sanjay, S.
    Madhu, M. J. Vinesh
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1787 - 1793
  • [27] Metal inclusions in the seams and fracture of the tool during friction stir welding of aluminium alloys
    Feofanov A.N.
    Ovchinnikov V.V.
    Gubin A.M.
    Welding International, 2021, 35 (4-6) : 185 - 191
  • [28] Effect of tool pin shapes on microstructure and mechanical behaviour of friction stir welding of dissimilar aluminium alloys
    Balamurugan S.
    Jayakumar K.
    Anbarasan B.
    Rajesh M.
    Materials Today: Proceedings, 2023, 72 : 2181 - 2185
  • [29] Improving the friction stir welding tool life for joining the metal matrix composites
    Emamian, Sattar S.
    Awang, Mokhtar
    Yusof, Farazila
    Sheikholeslam, Mohammadnassir
    Mehrpouya, Mehrshad
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (7-8): : 3217 - 3227
  • [30] Investigation of Friction Stir Welding of Metal Matrix Composites Using a Coated Tool
    Madhavarao, S.
    Raju, Ch. Rama Bhadri
    Kumar, G. S. V. Seshu
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 7735 - 7742
12345