A comparative study on fretting wear-resistant properties of ion-plated TiN and magnetron-sputtered MoS2 coatings

被引：32
作者：
Xu, GZ [1 ]
Zhou, ZR
Liu, JJ
机构：
[1] Tsing Hua Univ, Tribol Res Inst, Beijing 100084, Peoples R China
[2] SW Jiaotong Univ, Tribol Res Inst, Chengdu 610031, Peoples R China
来源：
WEAR | 1999年 / 224卷 / 02期
基金：
中国国家自然科学基金;
关键词：
fretting damage; fretting mechanism; TiN coating; MoS2; coating; wear debris;
D O I：
10.1016/S0043-1648(98)00341-X
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper studied the fretting properties and mechanism of TiN and MoS2 coatings on 1045 steel. The results showed that the fretting-resistant property of ion-plated TiN coating is obviously better than that of magnetron-sputtered MoS2 coating on SRV fretting tests. Under the given test parameters (normal load 10 N, slip amplitude 100 mu m and frequency 10 Hz), the fretting wear mechanism of TiN coating is particle detachment through the propagation and fracture of fine microcracks on surface, and the fretting wear mechanism of MoS2 coating showed its damage process by degradation and abrasion of materials. (C) 1999 Published by Elsevier Science S.A. All rights reserved.
引用
收藏
页码：211 / 215
页数：5
相关论文
共 14 条
[1]   SELECTED FRETTING-WEAR-RESISTANT COATINGS FOR TI-6-PERCENT-AL-4-PERCENT-V ALLOY [J].
BILL, RC .
WEAR, 1985, 106 (1-3) :283-301
[2]   A COMPARATIVE-STUDY OF THE FRETTING WEAR OF HARD CARBON COATINGS [J].
BLANPAIN, B ;
CELIS, JP ;
ROOS, JR ;
EBBERINK, J ;
SMEETS, J .
THIN SOLID FILMS, 1993, 223 (01) :65-71
[3]  
BRUYN KD, 1995, WEAR, V181, P856
[4]   LITERATURE-REVIEW OF PALLIATIVES FOR FRETTING FATIGUE [J].
GORDELIER, SC ;
CHIVERS, TC .
WEAR, 1979, 56 (01) :177-190
[5]   FRETTING WEAR OF CERAMICS [J].
KLAFFKE, D .
TRIBOLOGY INTERNATIONAL, 1989, 22 (02) :89-101
[6]  
LI DZ, 1992, FRETTING WEAR PROTEC
[7]  
LI SZ, 1987, ABRASIVE FRETTING WE
[8]  
LIU JJ, 1993, WEAR RESISTANCE MECH
[9]   Evaluation of fretting damage of zircaloy cladding tubes [J].
Vingsbo, O ;
Massih, AR ;
Nilsson, S .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (04) :705-710
[10]  
Waterhouse R.B., 1981, FRETTING FATIGUE APP
12