Hypothesis of thermal and mechanical energy storage with unconventional methods

There is not a real "storage market" and the range of technical solutions for electrical storage appears to be underdeveloped. The use of electrochemical batteries seems to be the easiest and cheapest way, but some problems related to disposal, average life span and storage capacity, still put a brake on their diffusion. The micro CAES-TES (Compressed Air Energy Storage - Thermal Energy Storage) systems with small renewable energy plants for cogeneration and trigeneration represent an important development perspective thank to the reuse of the heat generated at the stage of air compression (for heating) and air expansion (for cooling). This improves the complexity of the entire system because of the heat exchange and thermal storage units must match the capacities and performances of the air compression/expansion units. The paper presents a new mathematical model for micro CAES-TES systems, implemented in Matlab software environment. The novelty is the use of air compressed energy storage in small and residential applications, a trigeneration due to reuse of heat from air compression and expansion stage, only renewable energy used. By keeping the initial investment low, the analysis is extended to the optimal system configuration and identifies key parameters that have a dominant influence on improving system efficiency and provides useful guidance for CAES-TES system design. The results show that, for an air storage volume of 4 m(3), the optimal configuration is with a compression ratio of 15 splitted in two stages, charging time 5 h, mechanical storage efficiency 48%, compression air flow rate 3.73 kg/hour. The proposed system has a possible future development overall if combined with new possible scenarios of direct use of compressed air in the residential sector.