Unsteady flow and heat transfer analysis of an impinging synthetic jet

被引：36

作者：

Bazdidi-Tehrani, Farzad ^{[1
]}

Karami, Mahdi ^{[1
]}

Jahromi, Mehdi ^{[1
]}

机构：

[1] Iran Univ Sci & Technol, Sch Mech Engn, Tehran 1684613114, Iran

来源：

HEAT AND MASS TRANSFER | 2011年 / 47卷 / 11期

关键词：

IMPINGEMENT;

D O I：

10.1007/s00231-011-0801-0

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The present paper focuses on the analysis of unsteady flow and heat transfer regarding an axisymmetric impinging synthetic jet on a constant heat flux disc. Synthetic jet is a zero net mass flux jet that provides an unsteady flow without any external source of fluid. Present results are validated against the available experimental data showing that the SST/k - omega turbulence model is more accurate and reliable than the standard and low-Re k - epsilon models for predicting heat transfer from an impinging synthetic jet. It is found that the time-averaged Nusselt number enhances as the nozzle-to-plate distance is increased. As the oscillation frequency in the range of 16-400 Hz is increased, the heat transfer is enhanced. It is shown that the instantaneous Nu distribution along the wall is influenced mainly by the interaction of produced vortex ring and wall boundary layer. Also, the fluctuation level of Nu decreases as the frequency is raised.

引用

页码：1363 / 1373

页数：11

共 23 条

[1]

[Anonymous], 990449 AIAA

[2]

BAZDIDI-TEHRANI F., 2008, P 16 ANN C CFD SOC C

[3]

Ferziger J.H., 2002, Computational methods for fluid dynamics, Vthird

[4] Meso scale pulsating jets for electronics cooling [J].