The effect of loading rate on the in-plane shear strength of tri-axial braided composites

被引：1
作者：
May, Michael [1 ]
Kilchert, Sebastian [1 ]
机构：
[1] Ernst Mach Inst EMI, Fraunhofer Inst High Speed Dynam, Ernst Zermelo Str 4, D-79104 Freiburg, Germany
来源：
JOURNAL OF COMPOSITE MATERIALS | 2022年 / 56卷 / 03期
关键词：
Rate effect; braided composite; mechanical testing; fabrics; crash; high-rate testing; in-plane shear strength; STRAIN-RATE BEHAVIOR; COMPRESSION; DAMAGE; FAILURE; TENSION; MODEL;
D O I：
10.1177/00219983211047687
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The in-plane shear strength of tri-axial braided composite materials was measured for three different braid angles (30 degrees, 45 degrees, and 60 degrees) and two strain rates (0.001 s(-1); 3 s(-1)) using the three-rail shear test. The in-plane shear strength was found to be sensitive to both-the braid angle and the strain rate. An increase of braid angle resulted in a reduction of shear strength, whilst an increase of loading rate resulted in an increase of shear strength of 8%-17%, depending on the braid angle.
引用
收藏
页码：421 / 426
页数：6
相关论文
共 50 条
  • [31] Off-axis tensile strength and evaluation of the in-plane shear strength of paper
    Yoshihara, Hiroshi
    Yoshinobu, Masahiro
    HOLZFORSCHUNG, 2014, 68 (05) : 583 - 590
  • [32] The influence of regular openings and pre-compression loading on the in-plane strength parameters of unreinforced masonry shear walls
    Homaei, Farshad
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2023, 24 (01)
  • [33] Percolation modelling of dilation deformation evolution of sandstone under tri-axial cyclic loading-unloading
    Cheng, Jianchao
    Jia, Zhen
    Hou, Mengdong
    Liu, Shenggui
    Yang, Huan
    Liu, Yintong
    Li, Yang
    Xue, Dongjie
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2024, 43 (11): : 2687 - 2699
  • [34] Experimental investigation of the shear strength of one-way reinforced concrete (RC) slabs subjected to concentrated loads and in-plane transverse axial tension
    Fernandez, Pablo G.
    Mari, Antonio
    Oller, Eva
    STRUCTURAL CONCRETE, 2021, 22 (06) : 3661 - 3676
  • [35] In-plane shear response of unidirectional fiber reinforced and fabric reinforced carbon/epoxy composites
    Liang, Yuan
    Wang, Hai
    Gu, Xuesen
    POLYMER TESTING, 2013, 32 (03) : 594 - 601
  • [36] Hyperelastic Constitutive Modeling of Hexagonal Honeycombs Subjected to In-Plane Shear Loading
    Ju, Jaehyung
    Summers, Joshua D.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2011, 133 (01):
  • [37] Dynamic responses and damage evolutions of four-step three-dimensional braided composites subjected to high strain rate punch shear loading
    Li, Yuanyuan
    Gan, Xuehui
    Gu, Bohong
    Sun, Baozhong
    JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (12) : 1635 - 1650
  • [38] Experimental investigation of size effect on unreinforced concrete brick masonry walls under in-plane shear loading
    Lim, Woo-Young
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 428
  • [39] Coupled fracture modes of discs and plates under anti-plane loading and a disc under in-plane shear loading
    Pook, L. P.
    Campagnolo, A.
    Berto, F.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (08) : 924 - 938
  • [40] Effect of in-plane fiber waviness defects on the compressive properties of quasi-isotropic thermoplastic composites
    Sitohang, R. D. R.
    Grouve, W. J. B.
    Warnet, L. L.
    Akkerman, R.
    COMPOSITE STRUCTURES, 2021, 272
12345