Correlation between microstructure and tensile properties in powder metallurgy AZ91 alloys

被引：15

作者：

Zhang, Zhenya ^{[1
]}

Yu, Huashun ^{[2
]}

Chen, Gang ^{[1
]}

Yu, Hui ^{[2
]}

Xu, Changzheng ^{[3
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China

[2] Shandong Univ, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Peoples R China

[3] BaoShan Iron & Steel Co LTD, Baosteel Res Inst, Shanghai 201900, Peoples R China

来源：

MATERIALS LETTERS | 2011年 / 65卷 / 17-18期

关键词：

Microstructure; Tensile properties; Powder technology; Aging; AZ91; alloy; MECHANICAL-PROPERTIES; GRAIN-REFINEMENT; MAGNESIUM ALLOY; MG; DEFORMATION; TEMPERATURE; EXTRUSION; EVOLUTION; STRENGTH;

D O I：

10.1016/j.matlet.2011.05.089

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The ultrafine-grained (0.3-1.3 mu m) AZ91 alloys, which were fabricated by powder extrusion in the range of 200 to 350 degrees C and subsequent aging at 100 degrees C for 8 h, exhibit a remarkable yield stress of 360-478 MPa and moderate tensile elongations of 6-8%. A composite structure was developed after extrusion with uniform beta (Mg(17)Al(12)) particles dispersed in magnesium matrix. The extrusion temperature has an indirect role on yield stress since partial dissolution of beta particles induced by high extrusion temperature fails to retard grain growth. Moreover, the strength was further enhanced by the formation of nano-scale precipitates during artificial aging. The high strength could be attributed to a combination effect of grain refinement, particle reinforcement and precipitation hardening. (C) 2011 Elsevier BM. All rights reserved.

引用

页码：2686 / 2689

页数：4

共 18 条

[11] Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys [J].

Nie, JF .

SCRIPTA MATERIALIA, 2003, 48 (08) :1009-1015

[12] Effect of deformation temperature on Hall-Petch relationship registered for polycrystalline magnesium [J].

Ono, N ;

Nowak, R ;

Miura, S .

MATERIALS LETTERS, 2004, 58 (1-2) :39-43

[13] Grain refinement of Mg-Al-Zn alloys via accumulative roll bonding [J].

Pérez-Prado, MT ;

del Valle, JA ;

Ruano, OA .

SCRIPTA MATERIALIA, 2004, 51 (11) :1093-1097

[14] An enhanced FEM model for particle size dependent flow strengthening and interface damage in particle reinforced metal matrix composites [J].

Shao, J. C. ;

Xiao, B. L. ;

Wang, Q. Z. ;

Ma, Z. Y. ;

Yang, K. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (01) :39-45

[15] Evolution of the microstructure and hardness of a rapidly solidified/melt-spun AZ91 alloy upon aging at different temperatures [J].

Wang, Baishu ;

Liu, Yongbing ;

An, Jian ;

Li, Rongguang ;

Su, Zhenquo ;

Su, Guihua ;

Lu, You ;

Cao, Zhanyi .

MATERIALS CHARACTERIZATION, 2009, 60 (04) :316-321

[16] Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment [J].

Wang, Y ;

Liu, G ;

Fan, Z .

ACTA MATERIALIA, 2006, 54 (03) :689-699

[17] Enhanced mechanical properties in fine-grained Mg-1.0Zn-0.5Ca alloys prepared by extrusion at different temperatures [J].

Zhang, B. P. ;

Geng, L. ;

Huang, L. J. ;

Zhang, X. X. ;

Dong, C. C. .

SCRIPTA MATERIALIA, 2010, 63 (10) :1024-1027

[18] Crystallographyof Mg17Al12 precipitates in AZ91D alloy [J].

Zhang, MX ;

Kelly, MX .

SCRIPTA MATERIALIA, 2003, 48 (05) :647-652

← 1 2 →