Correlation between microstructure and tensile properties in powder metallurgy AZ91 alloys

被引：15

作者：

Zhang, Zhenya ^{[1
]}

Yu, Huashun ^{[2
]}

Chen, Gang ^{[1
]}

Yu, Hui ^{[2
]}

Xu, Changzheng ^{[3
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China

[2] Shandong Univ, Minist Educ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Jinan 250061, Peoples R China

[3] BaoShan Iron & Steel Co LTD, Baosteel Res Inst, Shanghai 201900, Peoples R China

来源：

MATERIALS LETTERS | 2011年 / 65卷 / 17-18期

关键词：

Microstructure; Tensile properties; Powder technology; Aging; AZ91; alloy; MECHANICAL-PROPERTIES; GRAIN-REFINEMENT; MAGNESIUM ALLOY; MG; DEFORMATION; TEMPERATURE; EXTRUSION; EVOLUTION; STRENGTH;

D O I：

10.1016/j.matlet.2011.05.089

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The ultrafine-grained (0.3-1.3 mu m) AZ91 alloys, which were fabricated by powder extrusion in the range of 200 to 350 degrees C and subsequent aging at 100 degrees C for 8 h, exhibit a remarkable yield stress of 360-478 MPa and moderate tensile elongations of 6-8%. A composite structure was developed after extrusion with uniform beta (Mg(17)Al(12)) particles dispersed in magnesium matrix. The extrusion temperature has an indirect role on yield stress since partial dissolution of beta particles induced by high extrusion temperature fails to retard grain growth. Moreover, the strength was further enhanced by the formation of nano-scale precipitates during artificial aging. The high strength could be attributed to a combination effect of grain refinement, particle reinforcement and precipitation hardening. (C) 2011 Elsevier BM. All rights reserved.

引用

页码：2686 / 2689

页数：4

共 18 条

[1] Application of rapid solidification powder metallurgy to the fabrication of high-strength, high-ductility Mg-Al-Zn-Ca-La alloy through hot extrusion [J].

Ayman, Elsayed ;

Junko, Umeda ;

Katsuyoshi, Kondoh .

ACTA MATERIALIA, 2011, 59 (01) :273-282

[2] Grain refinement and improved age hardening of Mg-Zn alloy by a trace amount of V [J].

Buha, J. .

ACTA MATERIALIA, 2008, 56 (14) :3533-3542

[3] Effect of extrusion temperature on the microstructure and plastic deformation of PM-AZ92 [J].

Garces, G. ;

Dominguez, F. ;

Perez, P. ;

Caruana, G. ;

Adeva, P. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 422 (1-2) :293-298

[4] Hall-Petch relation and boundary strengthening [J].

Hansen, N .

SCRIPTA MATERIALIA, 2004, 51 (08) :801-806

[5] Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa [J].

Kawamura, Y ;

Hayashi, K ;

Inoue, A ;

Masumoto, T .

MATERIALS TRANSACTIONS, 2001, 42 (07) :1172-1176

[6] Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging [J].

Kim, W. J. ;

Jeong, H. G. ;

Jeong, H. T. .

SCRIPTA MATERIALIA, 2009, 61 (11) :1040-1043

[7] Microstructure and mechanical properties of spray-formed AZ91 magnesium alloy [J].

Li, Yonybing ;

Chen, Yunbo ;

Cui, Hua ;

Xiong, Baiqing ;

Zhang, Jishan .

MATERIALS CHARACTERIZATION, 2009, 60 (03) :240-245

[8] Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg-9Al-1Zn alloy [J].

Li, Zhifeng ;

Dong, Jie ;

Zeng, Xiao Qing ;

Lu, Chen ;

Ding, Weng Jiang .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 466 (1-2) :134-139

[9] Microstructure and mechanical behavior of AZ91 Mg alloy processed by equal channel angular pressing [J].

Máthis, K ;

Gubicza, J ;

Nam, NH .

JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 394 (1-2) :194-199

[10]

MORA M, 2009, SCRIPTA MATER, V60, P776

← 1 2 →