Simulation of burr formation during machining: case study

被引：0
|
作者：
Zebala, Wojciech [1 ]
Rumian, Ksenia [1 ]
机构：
[1] Cracow Univ Technol, Prod Engn Inst, Al Jana Pawla 2 37, PL-31864 Krakow, Poland
来源：
PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2018 | 2018年 / 10808卷
关键词：
burr; machining; modelling; simulation;
D O I：
10.1117/12.2501536
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Paper presents some aspects of modeling and simulation of machining focusing on the burr formation in the last phase of the chip creation in the aluminum and titanium alloys. Researches concern the temperature and strain fields distributions in the cutting zone. Finite element method was applied in the numerical calculations basing on the Lagrange' equation.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Application and Analysis of RBF Neural Network for Burr Prediction in Micro-Machining
    Zhu Yunming
    Wang Guicheng
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 171 - 175
  • [42] Active Control Methods of Cutting Burr in Precision and Ultra-precision Machining
    Huang, Juan
    Zhu, Yunming
    Li, Qinfeng
    Wang, Guicheng
    CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 620 - 623
  • [43] Formation of the workpiece shape and surface finish during electrical discharge machining
    Lyubimov, V. V.
    Volgin, V. M.
    Gnidina, I. V.
    Salomatnikov, M. S.
    19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 : 319 - 324
  • [44] Study of Chip Morphology and Chip Formation Mechanism During Machining of Magnesium-Based Metal Matrix Composites
    Davis, Brian
    Dabrow, David
    Ju, Licheng
    Li, Anhai
    Xu, Chengying
    Huang, Yong
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (09):
  • [45] Formation of a transfer layer at the tool-chip interface during machining
    Qi, HS
    Mills, B
    WEAR, 2000, 245 (1-2) : 136 - 147
  • [46] A Finite Element Study of Chip Formation Process in Orthogonal Machining
    Priyadarshini, Amrita
    Pal, Surjya K.
    Samantaray, Arun K.
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2011, 1 (04) : 19 - 45
  • [47] Analysis of burr formation in finish machining of nickel-based superalloy with worn tools using micro-scale in-situ techniques
    Zannoun, Hamzah
    Schoop, Julius
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2023, 189
  • [48] Prediction of burr formation during face milling using an artificial neural network with optimized cutting conditions
    Lee, S. H.
    Dornfeld, D. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (12) : 1705 - 1714
  • [49] Investigation of the machining behavior of metal matrix composites (MMC) using chip formation simulation
    Schulze, Volker
    Zanger, Frederik
    Michna, Juergen
    Ambrosy, Florian
    Pabst, Ruediger
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 20 - 29
  • [50] Simulation machining of fiber-reinforced composites: A review
    Du, Jinguang
    Geng, Miao
    Ming, Wuyi
    He, Wenbin
    Ma, Jun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (1-2) : 1 - 15
12345