FLOW PATTERN, HEAT TRANSFER AND PRESSURE DROP BEHAVIORS OF MICRO-CHANNEL FLOW BOILING

被引：0

作者：

Saisorn, Sira ^{[1
]}

Srithumkhant, Pochai ^{[2
]}

Wongpromma, Pakorn ^{[2
]}

Suchatawat, Maturose ^{[2
]}

Wongwises, Somchai ^{[2
]}

机构：

[1] King Mongkuts Inst Technol Ladkrabang, Dept Mech Engn, Prince Chumphon Campus, Chumphon, Thailand

[2] King Mongkuts Inst Technol Ladkrabang, Fac Engn, Dept Mech Engn, Bangkok, Thailand

来源：

PROCEEDINGS OF THE ASME 16TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2018 | 2016年

关键词：

PERFORMANCE; ORIENTATION; DIAMETER; R-134A; SINK;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Two-phase flow of R-134a with high confinement number was experimentally carried out in this study. Flow boiling conditions for different orientations were controlled to take place in a stainless steel tube having a diameter of 0.5 mm. Based on a saturation pressure of 8 bar, a heat flux range of 2-26 kW/m(2), and a mass flux range of 610-815 kg/m(2)s, a constant surface heat flux condition was controlled by applied DC power supply on the test section. The flow behaviors were described based on flow pattern and pressure drop data while heat transfer mechanisms were explained by using heat transfer coefficient data. In this work, nucleate boiling was observed, and the importance of the change in the flow direction was neglected, corresponding to the confinement number of around 1.7.

引用

页数：6

共 50 条

[21] Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel
Zhou, Kan
Zhu, Hua
Li, Wei
Li, Junye
Sheng, Kuang
Shao, Shuai
Li, Haiwang
Tao, Zhi
JOURNAL OF ELECTRONIC PACKAGING, 2019, 141 (03)
[22] Effect of Metal Foam Insert Configurations on Flow Boiling Heat Transfer and Pressure Drop in a Rectangular Channel
Nam, Sanghyun
Kim, Dae Yeon
Kim, Youngwoo
Kim, Kyung Chun
MATERIALS, 2021, 14 (16)
[23] TWO PHASE PRESSURE DROP AND BOILING HEAT TRANSFER IN MICRO PIN FIN CHANNEL
Jung, Ki Moon
Lee, Hee Joon
PROCEEDINGS OF THE ASME 14TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2016, 2016,
[24] Experimental investigation of the flow and heat transfer performance in micro-channel heat exchangers with cavities
Huang, Binghuan
Li, Haiwang
Xia, Shuangzhi
Xu, Tiantong
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 159
[25] Continuous nanofluids jet impingement heat transfer and flow in a micro-channel heat sink
Naphon, P.
Nakharintr, L.
Wiriyasart, S.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 : 924 - 932
[26] Local heat transfer process and pressure drop in a micro-channel integrated with arrays of temperature and pressure sensors
Ko, H. S.
Gau, C.
MICROFLUIDICS AND NANOFLUIDICS, 2011, 10 (03) : 563 - 577
[27] Experimental study of heat transfer and pressure drop in micro-channel based heat sinks with tip clearance
Reyes, M.
Arias, J. R.
Velazquez, A.
Vega, J. M.
APPLIED THERMAL ENGINEERING, 2011, 31 (05) : 887 - 893
[28] Effect of gravity vector on flow boiling heat transfer, flow pattern map, and pressure drop of R245fa refrigerant in mini tubes
Abadi, Gholamreza Bamorovat
Moon, Chanhee
Kim, Kyung Chun
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2016, 83 : 202 - 216
[29] Local mechanisms prior to flow boiling of a subcooled liquid in rectangular micro-channel heat sinks
Jansen, Chong Jen-Haw
Abakar, Yousif Abdalla
Chen, Baiman
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2025, 160
[30] Correlation of the Flow Pattern and Flow Boiling Heat Transfer in Microchannels
Kuznetsov, Vladimir V.
Shamirzaev, Alisher S.
Kozulin, Igor A.
Kozlov, Stanislav P.
HEAT TRANSFER ENGINEERING, 2013, 34 (2-3) : 235 - 245

← 1 2 3 4 5 →