FLOW PATTERN, HEAT TRANSFER AND PRESSURE DROP BEHAVIORS OF MICRO-CHANNEL FLOW BOILING

被引：0

作者：

Saisorn, Sira ^{[1
]}

Srithumkhant, Pochai ^{[2
]}

Wongpromma, Pakorn ^{[2
]}

Suchatawat, Maturose ^{[2
]}

Wongwises, Somchai ^{[2
]}

机构：

[1] King Mongkuts Inst Technol Ladkrabang, Dept Mech Engn, Prince Chumphon Campus, Chumphon, Thailand

[2] King Mongkuts Inst Technol Ladkrabang, Fac Engn, Dept Mech Engn, Bangkok, Thailand

来源：

PROCEEDINGS OF THE ASME 16TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2018 | 2016年

关键词：

PERFORMANCE; ORIENTATION; DIAMETER; R-134A; SINK;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Two-phase flow of R-134a with high confinement number was experimentally carried out in this study. Flow boiling conditions for different orientations were controlled to take place in a stainless steel tube having a diameter of 0.5 mm. Based on a saturation pressure of 8 bar, a heat flux range of 2-26 kW/m(2), and a mass flux range of 610-815 kg/m(2)s, a constant surface heat flux condition was controlled by applied DC power supply on the test section. The flow behaviors were described based on flow pattern and pressure drop data while heat transfer mechanisms were explained by using heat transfer coefficient data. In this work, nucleate boiling was observed, and the importance of the change in the flow direction was neglected, corresponding to the confinement number of around 1.7.

引用

页数：6

共 50 条

[1] The difference in flow pattern, heat transfer and pressure drop characteristics of mini-channel flow boiling in horizontal and vertical orientations
Saisorn, Sira
Wongpromma, Pakorn
Wongwises, Somchai
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2018, 101 : 97 - 112
[2] Analysis of two-phase pressure drop fluctuations during micro-channel flow boiling
Wang, Yuan
Sefiane, Khellil
Wang, Zhen-guo
Harmand, Souad
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 70 : 353 - 362
[3] Boiling heat transfer, pressure drop, and flow pattern in a horizontal square minichannel
Jige, Daisuke
Inoue, Norihiro
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2019, 78
[4] Experimental investigations into flow boiling heat transfer in a micro-channel with hybrid of fin and porous coating structure
Zhang, Zitao
Wu, Yue
Cui, Kailu
Zhao, Haoteng
He, Kun
Yan, Xin
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 229
[5] Experimental investigation on flow boiling heat transfer and flow patterns in a single micro-channel with large mass velocity
Yang, Qingchuan
Shu, Bifen
Wang, Jing
Guo, Yin
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2018, 91 : 283 - 291
[6] Analytical and experimental determination of slug flow parameters, pressure drop and heat transfer coefficient in micro-channel condensation
Liang, Gangtao
Mascarenhas, Nikhin
Mudawar, Issam
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 111 : 1218 - 1233
[7] Flow Boiling Heat Transfer in Micro-Channel Heat Sinks under Sub-Atmospheric Pressures
Hu, X.
Lin, G.
Bu, X.
Cai, Y.
Wen, D.
EXPERIMENTAL HEAT TRANSFER, 2013, 26 (01) : 85 - 113
[8] Pressure drop characteristics of R134a during flow boiling in a single rectangular micro-channel
Keepaiboon, Chanyoot
Thiangtham, Phubate
Mahian, Omid
Dalkilic, Ahmet Selim
Wongwises, Somchai
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 71 : 245 - 253
[9] Transient characteristics of flow boiling in large micro-channel heat exchangers
Lee, Seunghyun
Mudawar, Issam
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 103 : 186 - 202
[10] Study on the convective heat transfer and pressure drop in the micro-channel heat sink
Naphon, Paisarn
Khonseur, Osod
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (01) : 39 - 44

← 1 2 3 4 5 →