Modeling the Influence of Engine Dynamics on Its Indicator Diagram

被引:4
|
作者
Deuszkiewicz, Piotr [1 ]
Dziurdz, Jacek [1 ]
Fabis, Pawel [2 ]
机构
[1] Warsaw Univ Technol, Inst Machine Design Fundamentals, PL-02524 Warsaw, Poland
[2] Silesian Tech Univ, Dept Transport & Aviat Engn, PL-40019 Katowice, Poland
关键词
internal combustion engine; indicator diagram; dynamics; TORSIONAL VIBRATION; DIESEL-ENGINE; COMBUSTION; PERFORMANCE; PARAMETERS; SIMULATION;
D O I
10.3390/s21237885
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
This article presents a proposal to describe the pressure changes in the combustion chamber of an engine as a function of the angle of rotation of the crankshaft, taking into account changes in rotational speed resulting from acceleration. The aim of the proposed model is to determine variable piston forces in simulation studies of torsional vibrations of a crankshaft with a vibration damper during the acceleration process. Its essence is the use of a Fourier series as a continuous function to describe pressure changes in one cycle of work. Such a solution is required due to the variable integration step during the simulation. It was proposed to determine the series coefficients on the basis of a Fourier transform of the averaged waveform of a discreet open indicator diagram, calculated for the registration of successive cycles. Recording of the indicative pressure waveforms and shaft angle sensor signals was carried out during tests on the chassis dynamometer. An analysis of the influence of the adopted number of series coefficients on the representation of signal energy was carried out. The model can also take into account the phenomenon of work cycle uniqueness by introducing random changes in the coefficients with magnitudes set on the basis of determined standard deviations for each coefficient of the series. An indispensable supplement to the model is a description of changes in the engine rotational speed, used as a control signal for the PID controller in the simulation of the load performed by the dynamometer. The accuracy of determining the instantaneous rotational speed was analyzed on the basis of signals from the crankshaft position angle sensor and the piston top dead center (TDC) sensor. Limitations resulting from the parameters of digital signal recording were defined.
引用
收藏
页数:18
相关论文
共 50 条
  • [1] Study on Indicator Diagram Modifying of Diesel Engine with MATLAB
    Ye, Xiaohua
    Wang, Fuqiu
    PROCEEDINGS OF THE 2017 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY (FMSMT 2017), 2017, 130 : 1633 - 1638
  • [2] Development on an acquisition and analysis system for indicator diagram of piston engine
    Mao Jianguo
    Wang Hanquan
    SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS II, PTS 1 AND 2, 2014, 475-476 : 268 - 272
  • [3] The Indicator of GDI Engine Operating Mode and Its Influence on Eco-Driving
    Pawlak, Grzegorz Marek
    Wolczynski, Zbigniew
    APPLIED SCIENCES-BASEL, 2022, 12 (05):
  • [4] A quick, simplified approach to the evaluation of combustion rate from an internal combustion engine indicator diagram
    Tomic, Mirojub V.
    Popovic, Slobodan J.
    Miljic, Nenad L.
    Petrovic, Stojan V.
    Cvetic, Milog R.
    Knezevic, Dragan M.
    Jovanovic, Zoran S.
    THERMAL SCIENCE, 2008, 12 (01): : 85 - 102
  • [5] Validation and optimization of the thermal cycle for a diesel engine by computational fluid dynamics modeling
    Tutak, Wojciech
    Jamrozik, Arkadiusz
    APPLIED MATHEMATICAL MODELLING, 2016, 40 (13-14) : 6293 - 6309
  • [6] Modeling of engine thermal dynamics and its application in energy management of HEVs considering engine warming-up
    Chu, Hongqing
    Shi, Haoyun
    Jiang, Yuyao
    Shen, Tielong
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2023, 24 (01) : 147 - 160
  • [7] Real-time engine model based on indicator diagram interacted with the vehicle model
    Xu, Liang
    Guo, Rui
    Li, Biao
    Zhang, Yong-he
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHANICS AND MECHATRONICS (ICMM 2015), 2016, : 387 - 394
  • [8] Internal Combustion Engine Heat Transfer and Wall Temperature Modeling: An Overview
    Fonseca, Leonardo
    Olmeda, Pablo
    Novella, Ricardo
    Valle, Ramon Molina
    ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, 2020, 27 (05) : 1661 - 1679
  • [9] Determination of top dead centre location based on the marine diesel engine indicator diagram analysis
    Varbanets R.
    Zalozh V.
    Shakhov A.
    Savelieva I.
    Piterska V.
    1600, Polish Society of Technical Diagnostics (21): : 51 - 60
  • [10] INFLUENCE OF ENGINE HARMONICS ON SYNCHRONISER MECHANISM DYNAMICS
    Walker, Paul D.
    Zhang, Nong
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 4A, 2014,