Low-temperature thermal bonding of PMMA microfluidic chips

被引：46

作者：

Li, JH ^{[1
]}

Chen, D

Chen, G

机构：

[1] Shanghai Jiao Tong Univ, State Lab Micronanometer Fabricat Technol, Key Lab Thin Film & Microfabricat Technol, Minist Educ,Res Inst Micronanometer Sci & Technol, Shanghai 200030, Peoples R China

[2] Fudan Univ, Dept Chem, Shanghai 200433, Peoples R China

来源：

ANALYTICAL LETTERS | 2005年 / 38卷 / 07期

关键词：

microfluidic chips; PMMA substrate; low-temperature bonding;

D O I：

10.1081/AL-200057209

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

A new method for thermally bonding poly(methyl methacrylate) (PMMA) substrates to form microfluidic chips is described. A PMMA substrate is first replicated by means of hot embossing with a metal template. Then a layer of low molecular weight PMMA film is formed on the PMMA cover plate by spin coating. Thermal bonding for channel enclosure is accomplished by heating the clamped PMMA substrate and cover plate at 95 degrees C for 20 min. The cross section demonstrated by the SEM photographs shows no obvious change has appeared. The functionality of these low temperature-bonded microfluidic substrates was demonstrated by performing high-resolution electrophoretic separations of the mixture of hydrazine compound.

引用

页码：1127 / 1136

页数：10

共 50 条

[1] Low Distortion Solvent Bonding of Microfluidic Chips
Ng, Shu Pei
Wiria, Florencia Edith
Tay, Nam Beng
INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2015) - SYMPOSIUM B, N, U, W, Z, 2016, 141 : 130 - 137
[2] Low-temperature bonding and interfacial failure behavior of Si/glass and glass/glass chips
Kang, Qiushi
Wang, Chenxi
Zhou, Shicheng
Lu, Tian
Tian, Yanhong
2020 21ST INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2020,
[3] Bonding of glass-based microfluidic chips at low- or room-temperature in routine laboratory
Chen, Lingxin
Luo, Guoan
Liu, Kehui
Ma, Jiping
Yao, Bo
Yan, Yongchen
Wang, Yiming
SENSORS AND ACTUATORS B-CHEMICAL, 2006, 119 (01) : 335 - 344
[4] Ultrasonic Bonding of Polymer Microfluidic Chips
Zhang, Zong-bo
Luo, Yi
Wang, Xiao-dong
Zhang, Zhen-qiang
Wang, Li-ding
2008 INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING, VOLS 1 AND 2, 2008, : 34 - 38
[5] A BONDING METHOD BETWEEN POLY(LACTIC ACID) (PLA) AND POLY(METHYL METHACRYLATE) (PMMA) FOR MICROFLUIDIC CHIPS
Duong, Huyen Lynh
Chen, Pin Chuan
2017 19TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS), 2017, : 1273 - 1276
[6] Low-temperature direct bonding of strengthened glass chips for optical imaging and co-packaged optics
Du, Yu
Liu, Linjie
Zhang, Xuming
Wang, Chenxi
2023 24TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2023,
[7] Low-temperature bonding of laser diode chips on silicon substrates using plasma activation of Au films
Higurashi, Eiji
Imamura, Teppei
Suga, Tadatomo
Sawada, Renshi
IEEE PHOTONICS TECHNOLOGY LETTERS, 2007, 19 (21-24) : 1994 - 1996
[8] Packaging of microfluidic chips via interstitial bonding
Lu, Chunmeng
Lee, L. James
Juang, Yi-Je
ELECTROPHORESIS, 2008, 29 (07) : 1407 - 1414
[9] Low-Temperature and Pressureless Cu-to-Cu Bonding by Electroless Pd Plating using Microfluidic System
Shih, Po-Shao
Huang, Jeng-Hau
Shen, Chang-Hsien
Lin, Yu-Chun
Grafner, Simon Johannes
Renganathan, Vengudusamy
Kao, Chin-Li
Lin, Yung-Sheng
Hung, Yun-Ching
Chiang, Chun-Wei
Kao, C. Robert
2023 IEEE 73RD ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE, ECTC, 2023, : 579 - 584
[10] Recycled low-temperature direct bonding of Si/glass and glass/glass chips for detachable micro/nanofluidic devices
Wang, Chenxi
Fang, Hui
Zhou, Shicheng
Qi, Xiaoyun
Niu, Fanfan
Zhang, Wei
Tian, Yanhong
Suga, Tadatomo
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 46 (46): : 156 - 167

← 1 2 3 4 5 →