Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate

被引:73
作者
Amin, Ibrahim [1 ]
El-Badawy, Sherif M. [1 ]
Breakah, Tamer [2 ]
Ibrahim, Mourad H. Z. [1 ]
机构
[1] Mansoura Univ, Publ Works Engn Dept, Fac Engn, Mansoura 35516, Egypt
[2] Amer Univ Cairo, Dept Construct Engn, New Cairo, Egypt
关键词
CNTs; MWCNTs; DSR; Rutting; Fatigue; RTFO; PAV; Superpave;
D O I
10.1016/j.conbuildmat.2016.05.168
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper mainly aims at investigating the effect of using multi-wall carbon nanotubes (MWCNTs) as an additive on the rheological properties of asphalt. Pristine (P-MWCNTs) were mixed at 120 degrees C with control asphalt at contents of 0.5%, 1.0%, 2.0% and 3.0% by asphalt weight. The empirical and rheological properties (using the Superpave testing) of the control and modified asphalts were evaluated at different aging conditions. The rheological properties of the modified asphalts were found to improve with increasing the percentage of P-MWCNTs. The high failure temperature and rutting resistance of both unaged and rolling thin film oven aged (RTFO) modified asphalts increased with increasing P-MWCNTs percentage and became suitable for the Egyptian climatic conditions as required by the Superpave binder characterization. At a given temperature, the fatigue cracking resistance and low temperature cracking resistance decreased with increasing P-MWCNTs percentage. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:361 / 372
页数:12
相关论文
共 23 条
  • [1] Abuilaiwi FA, 2010, ARAB J SCI ENG, V35, P37
  • [2] Amirkhanian A.N., 2011, INT J PAVEMENT RES T, V4, P281
  • [3] [Anonymous], 2008, D664808 ASTM
  • [4] [Anonymous], 2015, D4402D4402M15 ASTM
  • [5] [Anonymous], 2014, D36D36M14E1 ASTM
  • [6] [Anonymous], 2013, D652113 ASTM
  • [7] [Anonymous], 2009, D2493D2493M09 ASTM
  • [8] [Anonymous], 2015, INTER J PAVEMENT RES
  • [9] ASTM International, 2011, D681611 ASTM
  • [10] ASTM International, 2012, D287212E1 ASTM