Carbon Nanotube and Nanofiber Exposure Assessments: An Analysis of 14 Site Visits

被引:65
作者
Dahm, Matthew M. [1 ]
Schubauer-Berigan, Mary K. [1 ]
Evans, Douglas E. [2 ]
Birch, M. Eileen [2 ]
Fernback, Joseph E. [2 ]
Deddens, James A. [1 ]
机构
[1] NIOSH, Industrywide Studies Branch, Div Surveillance Hazard Evaluat & Field Studies, Cincinnati, OH 45226 USA
[2] NIOSH, Chem Exposure & Monitoring Branch, Div Appl Res & Technol, Cincinnati, OH 45226 USA
关键词
carbon nanofibers; carbon nanotubes; exposure assessment; nanomaterials; SECONDARY MANUFACTURERS; ENVIRONMENTAL-HEALTH; INHALATION EXPOSURE; ELEMENTAL CARBON; EMISSIONS; MOUSE; NANOMATERIALS; MESOTHELIOMA; WORKPLACE; AEROSOLS;
D O I
10.1093/annhyg/mev020
中图分类号
R1 [预防医学、卫生学];
学科分类号
1004 ; 120402 ;
摘要
Recent evidence has suggested the potential for wide-ranging health effects that could result from exposure to carbon nanotubes (CNT) and carbon nanofibers (CNF). In response, the National Institute for Occupational Safety and Health (NIOSH) set a recommended exposure limit (REL) for CNT and CNF: 1 mu g m(-3) as an 8-h time weighted average (TWA) of elemental carbon (EC) for the respirable size fraction. The purpose of this study was to conduct an industrywide exposure assessment among US CNT and CNF manufacturers and users. Fourteen total sites were visited to assess exposures to CNT (13 sites) and CNF (1 site). Personal breathing zone (PBZ) and area samples were collected for both the inhalable and respirable mass concentration of EC, using NIOSH Method 5040. Inhalable PBZ samples were collected at nine sites while at the remaining five sites both respirable and inhalable PBZ samples were collected side-by-side. Transmission electron microscopy (TEM) PBZ and area samples were also collected at the inhalable size fraction and analyzed to quantify and size CNT and CNF agglomerate and fibrous exposures. Respirable EC PBZ concentrations ranged from 0.02 to 2.94 mu g m(-3) with a geometric mean (GM) of 0.34 mu g m(-3) and an 8-h TWA of 0.16 mu g m(-3). PBZ samples at the inhalable size fraction for EC ranged from 0.01 to 79.57 mu g m(-3) with a GM of 1.21 mu g m(-3). PBZ samples analyzed by TEM showed concentrations ranging from 0.0001 to 1.613 CNT or CNF-structures per cm(3) with a GM of 0.008 and an 8-h TWA concentration of 0.003. The most common CNT structure sizes were found to be larger agglomerates in the 2-5 mu m range as well as agglomerates >5 mu m. A statistically significant correlation was observed between the inhalable samples for the mass of EC and structure counts by TEM (Spearman rho = 0.39, P < 0.0001). Overall, EC PBZ and area TWA samples were below the NIOSH REL (96% were < 1 mu g m(-3) at the respirable size fraction), while 30% of the inhalable PBZ EC samples were found to be > 1 mu g m(-3). Until more information is known about health effects associated with larger agglomerates, it seems prudent to assess worker exposure to airborne CNT and CNF materials by monitoring EC at both the respirable and inhalable size fractions. Concurrent TEM samples should be collected to confirm the presence of CNT and CNF.
引用
收藏
页码:705 / 723
页数:19
相关论文
共 40 条
[1]   Manufacture and use of nanomaterials: current status in the UK and global trends [J].
Aitken, R. J. ;
Chaudhry, M. Q. ;
Boxall, A. B. A. ;
Hull, M. .
OCCUPATIONAL MEDICINE-OXFORD, 2006, 56 (05) :300-306
[2]  
ASTM, 2014, WORK IT WK28561 NEW
[3]  
BARTLEY DL, 1998, APPL OCCUP ENV HYG, V13, P274
[4]   Particle exposure levels during CVD growth and subsequent handling of vertically-aligned carbon nanotube films [J].
Bello, Dhimiter ;
Hart, A. John ;
Ahn, Kwangseog ;
Hallock, Marilyn ;
Yamamoto, Namiko ;
Garcia, Enrique J. ;
Ellenbecker, Michael J. ;
Wardle, Brian L. .
CARBON, 2008, 46 (06) :974-977
[5]   Characterization of Exposures To Nanoscale Particles and Fibers During Solid Core Drilling of Hybrid Carbon Nanotube Advanced Composites [J].
Bello, Dhimiter ;
Wardle, Brian L. ;
Zhang, Jie ;
Yamamoto, Namiko ;
Santeufemio, Christopher ;
Hallock, Marilyn ;
Virji, M. Abbas .
INTERNATIONAL JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HEALTH, 2010, 16 (04) :434-450
[6]   Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubes [J].
Bello, Dhimiter ;
Wardle, Brian L. ;
Yamamoto, Namiko ;
deVilloria, Roberto Guzman ;
Garcia, Enrique J. ;
Hart, Anastasios J. ;
Ahn, Kwangseog ;
Ellenbecker, Michael J. ;
Hallock, Marilyn .
JOURNAL OF NANOPARTICLE RESEARCH, 2009, 11 (01) :231-249
[7]   Exposure and Emissions Monitoring during Carbon Nanofiber Production-Part I: Elemental Carbon and Iron-Soot Aerosols [J].
Birch, M. Eileen ;
Ku, Bon-Ki ;
Evans, Douglas E. ;
Ruda-Eberenz, Toni A. .
ANNALS OF OCCUPATIONAL HYGIENE, 2011, 55 (09) :1016-1036
[8]  
BSI, 2007, NANOTECHNOLOGIES PAR
[9]   Trends in fine particle concentration and chemical composition in Southern California [J].
Christoforou, CS ;
Salmon, LG ;
Hannigan, MP ;
Solomon, PA ;
Cass, GR .
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 2000, 50 (01) :43-53
[10]   Occupational Exposure Assessment in Carbon Nanotube and Nanofiber Primary and Secondary Manufacturers: Mobile Direct-Reading Sampling [J].
Dahm, Matthew M. ;
Evans, Douglas E. ;
Schubauer-Berigan, Mary K. ;
Birch, M. Eileen ;
Deddens, James A. .
ANNALS OF OCCUPATIONAL HYGIENE, 2013, 57 (03) :328-344