Static Mechanical Properties of GFRP Laminates with Waste GFRP Interleaf

被引：6
|
作者：
Aono, Yuuta [1 ]
Murae, Shota [1 ]
Kubo, Toshihiko [1 ]
机构：
[1] Kyushu Univ, Nishi Ku, Fukuoka 8190395, Japan
来源：
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) | 2011年 / 10卷
关键词：
Waste GFRP; Interleaf; Composite laminates; Law of mixture;
D O I：
10.1016/j.proeng.2011.04.344
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A recycle method of GFRP is investigated in this study. Waste GFRP was divided into short glass fibers and resin fragments by milling. However the tensile strength of composites with the chips of waste GFRP is low, the composites are expected that fiber bridging and higher compressive strength than resin. These advantages could be shown by suitable application. We examined the aptitude of the chips of waste GFRP for interleaf materials of unidirectional composite laminates. The tensile strength of interleaved composite laminates was improved and found to be better than that predicted using the law of mixture in all fiber directions. Shear support and fiber bridging by the interleaf seemed to improve the tensile strength of composite laminates. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11
引用
收藏
页数：6
相关论文
共 21 条
  • [1] Characteristics of fatigue crack growth in GFRP laminates
    Tong, J
    INTERNATIONAL JOURNAL OF FATIGUE, 2002, 24 (2-4) : 291 - 297
  • [2] Experimental analysis of GFRP laminates subjected to compression after drilling
    Karimi, Navid Zarif
    Heidary, Hossein
    Fotouhi, Mohamad
    Minak, Giangiacomo
    COMPOSITE STRUCTURES, 2017, 169 : 144 - 152
  • [3] Rubber concrete reinforced with macro fibers recycled from waste GFRP composites: Mechanical properties and environmental impact analysis
    Li, Shu-Jing
    Huang, Shi-Qi
    Kuang, You-Di
    Zou, Qi-Qi
    Wang, Lian-Kun
    Fu, Bing
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2024, 21
  • [4] Failure Prediction and Surface Characterization of GFRP Laminates: A Study of Stepwise Loading
    Muflikhun, Muhammad Akhsin
    Fiedler, Bodo
    POLYMERS, 2022, 14 (20)
  • [5] LOW VELOCITY IMPACT ANALYSIS ON GFRP LAMINATES UNDER DIFFERENT TEMPERATURES
    Pazhanivel, K.
    Bhaskar, G. B.
    Arunachalam, S.
    Hariharan, V.
    Elayaperumal, A.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 632 - +
  • [6] Dynamic splitting tensile behavior of ultra-high-performance concrete with macro fibers recycled from waste GFRP composites
    Xiao, G. Q.
    Liu, J. S.
    Chen, Y. H.
    You, X. M.
    Fu, B.
    CONSTRUCTION AND BUILDING MATERIALS, 2025, 467
  • [7] Investigation of the uncertainty of the in-plane mechanical properties of composite laminates
    Tian Longfei
    Lu Zhenzhou
    Hao Wenrui
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2012, 226 (C7) : 1739 - 1750
  • [8] Detection of Voids in Carbon/Epoxy Laminates and Their Influence on Mechanical Properties
    Di Landro, Luca
    Montalto, Aurelio
    Bettini, Paolo
    Guerra, Stefania
    Montagnoli, Fabrizio
    Rigamonti, Marco
    POLYMERS & POLYMER COMPOSITES, 2017, 25 (05) : 371 - 380
  • [9] Development And Testing Of Mechanical Properties Simulation System For Composite Laminates
    Wang Guilin
    2019 INTERNATIONAL CONFERENCE ON SMART GRID AND ELECTRICAL AUTOMATION (ICSGEA), 2019, : 161 - 164
  • [10] Influence of Fibre Architectures on the Mechanical Properties and Damage Failures of Composite Laminates
    Dalfi, Hussein
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2024, 24 (04) : 1906 - 1915
123