EFFECT OF SELECTED FACTORS ON MASS CONCENTRATION OF AIRBORNE DUST DURING WOOD SANDING

被引:5
作者
Dado, Miroslav [1 ]
Mikusova, Lucia [1 ]
Schwarz, Marian [2 ]
Hnilica, Richard [1 ]
机构
[1] Tech Univ Zvolen, Fac Environm & Mfg Technol, Dept Mfg Technol & Qual Management, Studentska 26, Zvolen 96001, Slovakia
[2] Tech Univ Zvolen, Fac Ecol & Environm Sci, Dept Environm Engn, TG Masaryka 24, Zvolen 96001, Slovakia
来源
MM SCIENCE JOURNAL | 2019年 / 2019卷
关键词
safety; aerosol; concentration; real-time measurement; workplace air; photometer; FURNITURE; PARTICLE;
D O I
10.17973/MMSJ.2019_12_2019155
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Sanding with handheld powered tools has been recognized as one of the most significant factor in personal exposure to wood dust in the woodworking industry. The aim of this study was to investigate the effects of wood species and grain size of abrasive on wood removal and mass concentration of wood dust emitted by a random orbit sander. Experimental study was designed as 4x4 full factorial experiments. The mass concentration of emitted wood dust was measured using aerosol monitor DustTrak DRX 8533. The results of this study confirm that softwood species generated higher dust concentrations than hardwood species due to difference in abrasion durability. Compared to sanding disc with P40 grit size, approximately 48% higher dust concentration was generated when the sanding disc with P240 grit size was used.
引用
收藏
页码:3679 / 3682
页数:4
相关论文
共 13 条
[1]   Association between Occupational Exposure to Wood Dust and Cancer: A Systematic Review and Meta-Analysis [J].
Alonso-Sardon, Montserrat ;
Chamorro, Antonio-J. ;
Hernandez-Garcia, Ignacio ;
Iglesias-de-Sena, Helena ;
Martin-Rodero, Helena ;
Herrera, Cristian ;
Marcos, Miguel ;
Antonio Miron-Canelo, Jose .
PLOS ONE, 2015, 10 (07)
[2]  
[Anonymous], 2016, 50632242016 EN
[3]   Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study [J].
Douwes, Jeroen ;
Cheung, Kerry ;
Prezant, Bradley ;
Sharp, Mark ;
Corbin, Marine ;
McLean, Dave ;
't Mannetje, Andrea ;
Schlunssen, Vivi ;
Sigsgaard, Torben ;
Kromhout, Hans ;
LaMontagne, Anthony D. ;
Pearce, Neil ;
McGlothlin, James D. .
ANNALS OF WORK EXPOSURES AND HEALTH, 2017, 61 (04) :416-428
[4]   Characterization of wood dust emission from hand-held woodworking machines [J].
Keller, F. -X. ;
Chata, F. .
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE, 2018, 15 (01) :13-23
[5]  
Ockajová A, 2008, DRVNA IND, V59, P3
[6]   Granulometric Analysis of Sanding Dust from Selected Wood Species [J].
Ockajova, Alena ;
Kucerka, Martin ;
Kristak, Lubos ;
Igaz, Rastislav .
BIORESOURCES, 2018, 13 (04) :7481-7495
[7]   Generation rate and particle size distribution of wood dust by handheld sanding operation [J].
Ojima, Jun .
JOURNAL OF OCCUPATIONAL HEALTH, 2016, 58 (06) :640-643
[8]   Dust-generation characteristics of hardwoods during sanding processes [J].
Ratnasingam, J. ;
Scholz, F. ;
Natthondan, V. ;
Graham, M. .
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2011, 69 (01) :127-131
[9]  
Saunders C. J., 2016, CBRU2016061 HLTH SAF
[10]  
THORPE A, 1995, AM IND HYG ASSOC J, V56, P236, DOI 10.1202/0002-8894(1995)056<0236:FITPOD>2.0.CO