Engineering properties of CFRP laminate under high strain rates

被引：33
|
作者：
Al-Mosawe, Alaa [1 ]
Al-Mahaidi, Riadh [1 ]
Zhao, Xiao-Ling [2 ]
机构：
[1] Swinburne Univ Technol, Fac Sci Engn & Technol, Hawthorn, Vic 3122, Australia
[2] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia
来源：
COMPOSITE STRUCTURES | 2017年 / 180卷
基金：
澳大利亚研究理事会;
关键词：
CFRP plates; High strain rate; Mechanical properties; CFRP tensile strength; COMPOSITE-MATERIALS; MECHANICAL-PROPERTIES; ENERGY-ABSORPTION; IMPACT; TENSILE; STEEL; COLUMNS; TUBES; APPARATUS; MATRIX;
D O I：
10.1016/j.compstruct.2017.08.005
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
This paper presents the results of experimental investigations of the tensile properties of different types of CFRP plates. Coupon specimens of low, normal and ultra-high modulus CFRP plates were prepared and tested under tensile loading. Four different strain rates were used, including one low strain rate and three high strain rates. Two methods of capturing strain were used: image correlation photogrammetry and foil strain gauges. The results showed a significant increase in the tensile strength, ultimate strain and elastic modulus for coupons under high strain rates. The CFRP coupons were prepared and tested in accordance with the ASTM3039-08 standards. Finite element analysis was performed and the results agreed very well with the experimental results. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：9 / 15
页数：7
相关论文
共 50 条
  • [1] Experimental study of strength properties of SLA resins under low and high strain rates
    Miedzinska, Danuta
    Gieleta, Roman
    Malek, Ewelina
    MECHANICS OF MATERIALS, 2020, 141 (141)
  • [2] Research progress on the dynamic compressive properties of ultra-high performance concrete under high strain rates
    Yu, Qingliang
    Zhuang, Weitan
    Shi, Caijun
    CEMENT & CONCRETE COMPOSITES, 2021, 124
  • [3] Dynamic flexural strength of concrete under high strain rates
    Chen, Xudong
    Chen, Chen
    Xu, Lingyu
    Shao, Yu
    MAGAZINE OF CONCRETE RESEARCH, 2017, 69 (03) : 109 - 119
  • [4] Mechanical properties of polyvinyl alcohol sponge under different strain rates
    Karimi, Alireza
    Navidbakhsh, Mahdi
    Yousefi, Hossein
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (04) : 404 - 408
  • [5] An insight into dynamic properties of SAC305 lead-free solder under high strain rates and high temperatures
    Long, Xu
    Su, Tianxiong
    Lu, Changheng
    Wang, Shaobin
    Huang, Jiaqiang
    Chang, Chao
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2023, 175
  • [6] The influence of high strain rates on mechanical properties and microstructure of CuCrZr alloy under strong current carrying condition
    Wu, Kongwei
    Wu, Weichao
    Pan, Aigang
    Guo, Zhiming
    Cui, Fei
    Yang, Xiaojun
    Yang, Guanyu
    MATERIALS CHARACTERIZATION, 2024, 216
  • [7] Measurement of the properties of woven CFRP T300/914 at different strain rates
    Hou, JP
    Ruiz, C
    COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (15) : 2829 - 2834
  • [8] Influence of carbon fiber's surface state on interlaminar shear properties of CFRP laminate
    Sha, J. J.
    Dai, J. X.
    Li, J.
    Wei, Z. Q.
    Hausherr, J. -M.
    Krenkel, W.
    COMPOSITE INTERFACES, 2013, 20 (08) : 543 - 552
  • [9] Interface tensile and fracture behavior of the Ti/Al3Ti Metal-Intermetallic Laminate (MIL) composite under quasi-static and high strain rates
    Zhou, Peijun
    Guo, Chunhuan
    Wang, Enhao
    Wang, Zeming
    Chen, Ye
    Jiang, Fengchun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 665 : 66 - 75
  • [10] Thermomechanical constitutive behaviour of 3D printed biomimetic polymer material under high strain rates
    Long, Xu
    Hu, Yuntao
    Su, Tianxiong
    Iyela, Percy M.
    Su, Yutai
    Yan, Wuzhu
    Liu, Jun
    Geng, Xiaoliang
    Chang, Chao
    Wu, Xiaodong
    POLYMER TESTING, 2024, 134
12345