Construction of biomimetic artificial intervertebral disc scaffold via 3D printing and electrospinning

Intervertebral disc (IVD) degeneration is a clinically disease that seriously endangers people's health. Tissue engineering provides a promising method to repair and regenerate the damaged IVD physiological function. Successfully tissue-engineered IVD scaffold should mimic the native IVD histological and macro structures. Here, 3D printing and electrospinning were combined to construct an artificial IVD composite scaffold. Poly lactide (PLA) was used to print the IVD frame structure, the oriented porous poly(L-lactide)/octa-armed polyhedral oligomeric silsesquioxanes (PLLA/POSS-(PLLA)8) fiber bundles simulated the annulus fibrosus (AF), and the gellan gum/poly (ethylene glycol) diacrylate (GG/PEGDA) double network hydrogel loaded with bone marrow mesenchymal stem cells (BMSCs) simulated the nucleus pulposus (NP) structure. Morphological and mechanical tests showed that the structure and mechanical properties of the IVD scaffold were similar to that of the natural IVD. The compression modulus of the scaffold is about 10 MPa, which is comparable to natural IVD and provides good mechanical support for tissue repair and regeneration. At the same time, the porosity and mechanical properties of the scaffold can be regulated through the 3D model design. In the AF structure, the fiber bundles are oriented concentrically with each subsequent layer oriented 60 degrees to the spinal column, and can withstand the tension generated during the deformation of the NP. In the NP structure, BMSCs were evenly distributed in the hydrogel and could maintain high cell viability. Animal experiment results demonstrated that the biomimetic artificial IVD scaffold could maintain the disc space and produce the new extracellular matrix. This engineered biomimetic IVD scaffold is a promising biomaterial for individualized IVD repair and regeneration.