Enhanced toughness and skin grafting durability of a dermatome made of Fe-based bulk metallic glass composites

被引：5
作者：
Liao, Y. C. [1 ]
Song, S. M. [2 ]
Li, T. H. [2 ]
Tsai, P. H. [2 ]
Chen, C. Y. [1 ]
Jang, J. S. C. [1 ,2 ]
Chu, J. P. [3 ]
Tseng, C. M. [4 ]
机构：
[1] Natl Cent Univ, Dept Mech Engn, Taoyuan, Taiwan
[2] Natl Cent Univ, Inst Mat Sci & Engn, Taoyuan, Taiwan
[3] Natl Taiwan Univ Sci & Technol, Dept Mat Sci & Engn, Taipei, Taiwan
[4] Ming Chi Univ Technol, Dept Mat Engn, Taipei, Taiwan
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2020年 / 241卷
关键词：
Bulk metallic glass; Composite; Thermal properties; Corrosion resistance; Sharpness test; CORROSION; CR; ALLOYS; FABRICATION; SHARPNESS; PROPERTY; BLADE; CO;
D O I：
10.1016/j.matchemphys.2019.122281
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Based on the concept of dispersion toughening on the bulk metallic glass composites (BMGCs), a series of Fe-based BMGC5 with compositions of (Fe41Cr15Co7Mo14C12B9Y2)(100-x) Ta-x(x = 2-5) were successfully fabricated by arc-melting and suction casting method. The excess of Ta was revealed to form one kind of fine Ta-rich precipitate and distributed homogeneously in the amorphous matrix. Accordingly, the alloy composition of Fe-based BMGC were further modified by adding 3.5 at% Ta to replace the content of boron and carbon, and fabricate into the Fe41Cr15Co7Mo14C10B7.5Y2Ta3.5 (Fe41C10B7.5Ta3.5) BMGC rod. As a result, the fracture toughness of this Fe41C10B7.5Ta3.5 BMGC was significantly improved to 10.2 MPa.root m, which is about twice values of the Fe-base BMG without Ta content. Fe41C10B7.5Ta3.5 BMGC dermatome exhibits much higher sharpness than the commercial one on the simulated skin grafting test because of its lower surface roughness and higher hardness. Moreover, the Fe41C10B7.5Ta3.5 BMGC dermatome presents much better durability on simulated skin grafting test, it can remain sharper edge-tip with a low blade sharpness index (BSI) value of 0.35 (in comparison with the BSI value of 0.59 for commercial blades) after the skin grafting test over 15 cm length.
引用
收藏
页数：7
相关论文
共 29 条
[1]   Fe-based bulk metallic glasses with Y addition [J].
Baser, Tanya Aycan ;
Baricco, Marcello .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 434 (176-179) :176-179
[2]   Effect of tungsten, molybdenum, nickel and cobalt on the corrosion and wear performance of Fe-based metallic glass coatings [J].
Burkov, A. A. ;
Chigrin, P. G. .
SURFACE & COATINGS TECHNOLOGY, 2018, 351 :68-77
[3]   Fabrication and characterizations of thin film metallic glasses: Antibacterial property and durability study for medical application [J].
Chu, Jinn P. ;
Liu, Tz-Yah ;
Li, Chia-Lin ;
Wang, Chen-Hao ;
Jang, Jason S. C. ;
Chen, Ming-Jen ;
Chang, Shih-Hsin ;
Huang, Wen-Chien .
THIN SOLID FILMS, 2014, 561 :102-107
[4]   New criterion of glass forming ability for bulk metallic glasses [J].
Du, X. H. ;
Huang, J. C. ;
Liu, C. T. ;
Lu, Z. P. .
JOURNAL OF APPLIED PHYSICS, 2007, 101 (08)
[5]   Metallic glass matrix composite with precipitated ductile reinforcement [J].
Fan, C ;
Ott, RT ;
Hufnagel, TC .
APPLIED PHYSICS LETTERS, 2002, 81 (06) :1020-1022
[6]   Effects of Mn addition on the magnetic property and corrosion resistance of bulk amorphous steels [J].
Fang, Huazhi ;
Hui, Xidong ;
Chen, Guoliang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 464 (1-2) :292-295
[7]   Effects of carbon content on the mechanical properties of amorphous steel alloys [J].
Gu, X. J. ;
Poon, S. Joseph ;
Shiflet, Gary J. .
SCRIPTA MATERIALIA, 2007, 57 (04) :289-292
[8]   Recent progress in metallic glasses in Taiwan [J].
Huang, J. C. ;
Chu, J. P. ;
Jang, J. S. C. .
INTERMETALLICS, 2009, 17 (12) :973-987
[9]   Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1-x,COx)0.75B0.2Si0.05]96Nb4 system [J].
Inoue, A ;
Shen, BL ;
Chang, CT .
ACTA MATERIALIA, 2004, 52 (14) :4093-4099
[10]   Critical obstacle size to deflect shear banding in Zr-based bulk metallic glass composites [J].
Jang, J. S. C. ;
Li, T. H. ;
Tsai, P. H. ;
Huang, J. C. ;
Nieh, T. G. .
INTERMETALLICS, 2015, 64 :102-105
123