TEMPERATURE EFFECT OF LOW VELOCITY IMPACT RESISTANCE OF GLASS/EPOXY LAMINATES
被引:8
作者:
Kang, Ki-Weon
论文数: 0引用数: 0
h-index: 0
机构:
Kunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South KoreaKunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South Korea
Kang, Ki-Weon
[1
]
Kim, Heung-Seob
论文数: 0引用数: 0
h-index: 0
机构:
Inje Univ, Dept Mech Engn, Gimhae 621749, Gyongnam, South KoreaKunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South Korea
Kim, Heung-Seob
[2
]
Chung, Tae-Jin
论文数: 0引用数: 0
h-index: 0
机构:
Kunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South KoreaKunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South Korea
Chung, Tae-Jin
[1
]
Koh, Seung-Kee
论文数: 0引用数: 0
h-index: 0
机构:
Kunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South KoreaKunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South Korea
Koh, Seung-Kee
[1
]
机构:
[1] Kunsan Natl Univ, Sch Mech & Automobile Engn, Kunsan 573701, Jeonbuk, South Korea
[2] Inje Univ, Dept Mech Engn, Gimhae 621749, Gyongnam, South Korea
来源:
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
|
2010年
/
24卷
/
15-16期
关键词:
Glass/epoxy laminates;
impact resistance;
residual strength;
temperature effect;
COMPOSITES;
D O I:
10.1142/S0217979210065428
中图分类号:
O59 [应用物理学];
学科分类号:
摘要:
This paper aims to evaluate the effect of temperature on impact damage resistance of glass/epoxy laminates. A series of impact tests were performed using an instrumented impact-testing machine at temperature ranging from -40 degrees C to +80 degrees C. The resulting impact damage was measured using back light method. The impact resistance parameters were employed to understand the damage resistance. It was observed that temperature has a little effect on the impact responses of composite laminates. The damage resistance of glass/epoxy laminates is somewhat deteriorated at two opposite extremes of the studied temperature range and this behavior is likely due to the property change of glass/epoxy laminates under extreme temperatures