Studies on the Physicochemical Properties of Natural Rubber/Polyethylene Blends and the Impact of Radiation on Their Properties

被引：1

作者：

Haque, M. A. ^{[1
]}

Ahmad, M. U. ^{[2
]}

Khan, M. A. ^{[2
]}

Raihan, S. M. A. ^{[3
]}

Dafader, N. C. ^{[4
]}

机构：

[1] Annanda Mohan Govt Coll, Dept Chem, Mymensingh, Bangladesh

[2] Jahangirnagar Univ, Dept Chem, Dhaka, Bangladesh

[3] Natl Univ, Dept Chem, Gazipur, Bangladesh

[4] Bangladesh Atom Energy Commiss, Inst Nucl Sci & Technol, Dhaka, Bangladesh

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2010年 / 49卷 / 10期

关键词：

Blend; Extrusion; Leaching; Natural rubber; Polyethylene; RUBBER;

D O I：

10.1080/03602559.2010.482079

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

NR and Polyethylene (PE) were blended at different compositions of PE, like 00, 35, 50, 65, 85 and 100% by extrusion method and then the blend films were made by hot press. The blends, NR and PE films were irradiated and their mechanical properties were investigated before and after leaching. Blend compositions were optimized and found that the 50-65% PE blends give the best quality. It is also found that 5-8 kGy radiation doses are optimal for improved properties of blends. Leaching enhances mechanical properties and lower radiation doses give more enhanced mechanical properties compared to unleached one.

引用

页码：1010 / 1015

页数：6

共 13 条

[1] BLENDING OF NATURAL-RUBBER WITH LINEAR LOW-DENSITY POLYETHYLENE
ABDULLAH, I
AHMAD, S
SULAIMAN, CS
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1995, 58 (07) : 1125 - 1133
[2] Ahmad A, 2003, IRAN POLYM J, V12, P381
[3] Improvement of physicochemical properties of natural rubber and polyvinyl alcohol blends by radiation vulcanization
Haque, M. A.
Ahmad, M. U.
Akhtar, F.
Dafader, N. C.
Haque, M. E.
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2007, 46 (10-12) : 927 - 931
[4] Improvement of physicochemical properties of rubber blends between nonirradiated and irradiated rubber latexes by radiation vulcanization
Haque, MA
Ahmad, MU
Akhtar, F
Dafader, NC
Haque, ME
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2004, 43 (05) : 1345 - 1353
[5] HAQUE MA, 2006, NATL U J SCI, V1, P27
[6] *ISO, 1994, RUBB VULC THERM DET, V37
[7] KARDAN M, 2004, J INT POLYM SCI TECH, V31, pT7
[8] MOOURA Y, 1961, J APPL POLYM SCI, V5, P233
[9] MOOURA Y, 1961, J APPL POLYM SCI, V5, P401
[10] OLEG ON, 2001, IRAN POLYM J, V10, P9

← 1 2 →