Analysis of Selected Properties of Welded Joints of the HSLA Steels

被引：18

作者：

Miletic, Ivan ^{[1
]}

Ilic, Andreja ^{[1
]}

Nikolic, Ruzica R. ^{[2
]}

Ulewicz, Robert ^{[3
]}

Ivanovic, Lozica ^{[1
]}

Sczygiol, Norbert ^{[3
]}

机构：

[1] Univ Kragujevac, Fac Engn, Kragujevac 34000, Serbia

[2] Univ Zilina, Res Ctr, Zilina 01026, Slovakia

[3] Univ Technol, Dept Prod Engn & Safety, Czestochowa 42201, Poland

来源：

MATERIALS | 2020年 / 13卷 / 06期

关键词：

high-strength low-alloyed steels; impact toughness; micro hardness; V-butt multiple-pass weld; MMA; MAG welding procedure(s); HEAT-AFFECTED ZONE; MECHANICAL-PROPERTIES; WELDING CONSUMABLES; IMPACT TOUGHNESS; STRENGTH; MICROSTRUCTURE; TENSILE; PARAMETERS; BEHAVIOR;

D O I：

10.3390/ma13061301

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This paper presents research of the impact toughness and hardness distribution in specific zones of a 'single V'butt multiple-pass welded joints of the high-strength low-alloyed steels. Obtained values of the impact toughness are analyzed in correlation with a microstructure in specific zones of the welded joint, together with the micro hardness distribution found in the related zones. Based on the carried out analysis and results obtained in experiments, the applied technology of welding was evaluated. The original conclusions on influence of the selected welding procedure manual metal arc (MMA) for the root passes and metal active gas (MAG) for the filling and covering passes) on impact toughness of the high-strength low-alloyed steels are drawn. The paper also presents discussion on the valid standards and recommendations related to welding of those steels, from the aspect of applications in design of steel welded constructions.

引用

页数：12

共 32 条

[1] Investigating the effects of welding process on residual stresses, microstructure and mechanical properties in HSLA steel welds
Alipooramirabad, Houman
Paradowska, Anna
Ghomashchi, Reza
Reid, Mark
[J]. JOURNAL OF MANUFACTURING PROCESSES, 2017, 28 : 70 - 81
[2] [Anonymous], 2016, 1481 ISOFDIS
[3] Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
Arsic, D.
Djordjevic, M.
Zivkovic, J.
Sedmak, A.
Aleksandrovic, S.
Lazic, V.
Rakic, D.
[J]. STRENGTH OF MATERIALS, 2016, 48 (05) : 687 - 695
[4] Arsic D., 2015, Mater. Eng.-Materialove Inz. MEMI, V22, P33
[5] EXPERIMENTAL AND NUMERICAL STUDY OF TEMPERATURE FIELD DURING HARD-FACING OF DIFFERENT CARBON STEELS
Arsic, Dusan M.
Ivanovic, Ivana B.
Sedmak, Aleksandar S.
Lazic, Mirjana M.
Kalaba, Dragan, V
Cekovic, Ivana R.
Ratkovic, Nada R.
[J]. THERMAL SCIENCE, 2020, 24 (03): : 2233 - 2241
[6] Bokuvka O., 2013, PROD ENG ARCH, V1, P6, DOI DOI 10.30657/PEA.2013.01.02
[7] Carc M., 2016, P 18 INT MET MAT C I, P928
[8] Effects of Welding on the Tensile Performance of High Strength Steel T-stub Joints
Chen, Cheng
Zhang, Xingzhao
Zhao, Mingshan
Lee, Chi-King
Fung, Tat-Ching
Chiew, Sing-Ping
[J]. STRUCTURES, 2017, 9 : 70 - 78
[9] Dunder M, 2018, METALURGIJA, V57, P242
[10] Effect of welding parameters on the mechanical properties of GMA-welded HY-80 steels
Durmusoglu, Senol
Turker, Mehmet
Tosun, Murat
[J]. MATERIALS TESTING, 2015, 57 (10) : 866 - 871

← 1 2 3 4 →