Blade resonance parameter identification based on tip-timing method without the once-per revolution sensor

被引：86

作者：

Guo, Haotian ^{[1
]}

Duan, Fajie ^{[1
]}

Zhang, Jilong ^{[1
]}

机构：

[1] Tianjin Univ, State Key Lab Precis Measuring Technol & Instrume, Tianjin 300072, Peoples R China

来源：

MECHANICAL SYSTEMS AND SIGNAL PROCESSING | 2016年 / 66-67卷

关键词：

Blade tip-timing; Blade vibration; Parameter identification; VIBRATION MEASUREMENTS; DAMAGE;

D O I：

10.1016/j.ymssp.2015.06.016

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Blade tip-timing is the most effective method for blade vibration online measurement of turbomachinery. In this article a synchronous resonance vibration measurement method of blade based on tip-timing is presented. This method requires no once-per revolution sensor which makes it more generally applicable in the condition where this sensor is difficult to install, especially for the high-pressure rotors of dual-rotor engines. Only three casing mounted probes are required to identify the engine order, amplitude, natural frequency and the damping coefficient of the blade. A method is developed to identify the blade which a tip-timing data belongs to without once-per revolution sensor. Theoretical analyses of resonance parameter measurement are presented. Theoretic error of the method is investigated and corrected. Experiments are conducted and the results indicate that blade resonance parameter identification is achieved without once-per revolution sensor. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：625 / 639

页数：15

共 32 条

[21] Identification method of foreign object impact on blade based on blade tip timing
Wang, Shuhui
Wang, Weimin
Li, Tianqing
Wang, Jiale
Fu, Zhenyu
Zhang, Ya
[J]. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2024, 45 (20):
[22] Blade Serial Number Identification Based on Blade Tip Clearance without OPR Sensor
Zhang, Liang
Wang, Qidi
Yuan, Huiqun
Li, Xin
[J]. SHOCK AND VIBRATION, 2021, 2021
[23] Sparse-assisted blade tip timing signal decomposition and automatic resonance region identification method
Wei, Daitong
Yu, Tao
Gao, Peixin
Li, Hongkun
Chen, Yugang
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2025, 226
[24] Damage detection in high-speed rotated blades by blade tip-timing method based on compressed sensing
Xu, Hailong
Chen, Zhongsheng
Yang, Yongmin
Tao, Limin
Guan, Fengjiao
Hu, Haifeng
[J]. 2017 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-HARBIN), 2017, : 610 - 614
[25] Analysis Method for Under-sampled Blade Tip-timing Signal Based on the Rotational Invariance Technique with Total Least Squares Principle
He C.
Li H.
Zhao X.
Wang W.
Wu S.
[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (19): : 103 - 111
[26] An improved multiple per revolution-based blade tip timing method and its applications on large-scale compressor blades
Fan, Zhenfang
Li, Hongkun
Dong, Jiannan
Zhao, Xinwei
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 167
[27] Parameter identification method of nonuniform and under-sampled blade tip timing based on extended DFT and compressed sensing
Zhang, Jiwang
Zhang, Xu
Ding, Keqin
Wang, Rongren
[J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2023, 34 (12)
[28] A method for multi-harmonic vibration analysis of turbomachinery blades using Blade Tip-Timing and clearance sensor waveforms and optimization techniques
Heller, D.
Sever, I. A.
Schwingshackl, C. W.
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2020, 142
[29] An improved blade tip timing dual-probe method of synchro-resonance frequency identification for blade damage detection
Dong, Jiannan
Li, Hongkun
Cao, Hongwei
Fan, Zhenfang
Chen, Yugang
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2023, 203
[30] Identification of blade vibration parameters based on improved blade tip timing technology and two-factor analysis method
Xu, Shuben
Wei, Daitong
Li, Hongkun
Chen, Yugang
[J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2025, 36 (01)

← 1 2 3 4 →