Influence of environmental conditions on concrete manufactured with recycled and steel slag aggregates at early ages and long term

被引：23

作者：

Aparicio, S. ^{[1
]}

Hernandez, M. G. ^{[1
]}

Anaya, J. J. ^{[1
]}

机构：

[1] ITEFI CSIC, Inst Tecnol Fis & Informac, C Serrano 144, Madrid 28006, Spain

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2020年 / 249卷

关键词：

Curing process; Recycled aggregates; Steel slag aggregates; Monitoring; Relative humidity; Temperature; Wireless sensor networks; INTERNAL RELATIVE-HUMIDITY; MECHANICAL-PROPERTIES; SHRINKAGE; HYDRATION;

D O I：

10.1016/j.conbuildmat.2020.118739

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents the influence of environmental conditions on behaviour of concrete manufactured with recycled or steel slag aggregates. These materials were monitored during 270 days, approximately, by means of wireless sensor networks and a specific set of sensors, designed and fabricated to monitor internal temperature and humidity at different positions, as well as internal strain. In addition, ultrasonic velocity was monitored during early ages. For that purpose, different mixes have been analysed and tested under similar conditions. At early ages, it was found that the hydration process is accelerated adding recycled aggregates and delayed for steel slags, but the highest compressive strength values after 28 days of curing, were reached for steel slag aggregates and these values increase with the percentage of replacement. At long term, all mixes except the mixes with only steel slag aggregates have lost more RH than in normal concrete. The shrinkage in concrete with recycled aggregates or with only steel slags is higher than the observed in normal concrete. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页数：14

共 22 条

[1] Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability [J].

Adegoloye, G. ;

Beaucour, A. -L. ;

Ortola, S. ;

Noumowe, A. .

CONSTRUCTION AND BUILDING MATERIALS, 2015, 76 :313-321

[2]

[Anonymous], 2011, F2420052011 ASTM

[3]

Aparicio S., 2016, TECHN WORKSH COST AC

[4]

Aparicio S., 2012, Patent No. [ES2012/070439, 2012070439]

[5] Resistance to fragmentation of recycled concrete aggregates [J].

Artoni, Riccardo ;

Cazacliu, Bogdan ;

Hamard, Erwan ;

Cothenet, Alexis ;

Parhanos, Regis Sebben .

MATERIALS AND STRUCTURES, 2017, 50 (01)

[6]

Cebeci O.Z., 1987, MATER STRUCT, V20, P270

[7] The effects of recycled clay brick content on the engineering properties, weathering durability, and resilient modulus of recycled concrete aggregate [J].

Diagne, Mababa ;

Tinjum, James M. ;

Nokkaew, Kongrat .

TRANSPORTATION GEOTECHNICS, 2015, 3 :15-23

[8] Hygro-thermo-chemo-mechanical modelling of concrete at early ages and beyond. Part I: Hydration and hygro-thermal phenomena [J].

Gawin, Dariusz ;

Pesavento, Francesco ;

Schrefler, Bernhard A. .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2006, 67 (03) :299-331

[9] Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues [J].

Granja, Jose L. ;

Azenha, Miguel ;

de Sousa, Christoph ;

Faria, Rui ;

Barros, Joaquim .

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2014, 12 (08) :250-265

[10] Internal relative humidity and drying stress gradients in concrete [J].

Grasley, Zachary C. ;

Lange, David A. ;

D'Ambrosia, Matthew D. .

MATERIALS AND STRUCTURES, 2006, 39 (09) :901-909

← 1 2 3 →