Groove Gap Waveguide in 3-D Printed Technology for Low Loss, Weight, and Cost Distribution Networks

被引：46

作者：

Tamayo-Dominguez, Adrian ^{[1
]}

Fernandez-Gonzalez, Jose-Manuel ^{[1
]}

Sierra-Perez, Manuel ^{[1
]}

机构：

[1] Univ Politecn Madrid, Radiat Grp, Dept Signals Syst & Radiocommun, E-28040 Madrid, Spain

来源：

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES | 2017年 / 65卷 / 11期

关键词：

Additive manufacturing; distribution network; groove gap waveguide (GGW); Ka-band; low cost; low loss; low weight; low-profile antenna; metallized 3-D printed technology; milling; roughness; thermal;

D O I：

10.1109/TMTT.2017.2709305

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents the design and fabrication of low loss, weight, and cost prototypes in groove gap waveguide technology at Ka-band, manufactured with a metallized 3-D printing technique. A wide analysis of loss mechanisms and printing imperfections has been conducted, as well as the effect of temperature on structural deformations. Metallized 3-D printed and CNC machined prototypes have been compared and characterized with simulations and measurements at a band from 28 to 30 GHz. The average measured losses for metallized plastic prototypes are 1.4 dB/m.

引用

页码：4138 / 4147

页数：10

共 50 条

[21] Full 3-D Printed Microwave Termination: A Simple and Low-Cost Solution
Arbaoui, Younes
Laur, Vincent
Maalouf, Azar
Queffelec, Patrick
Passerieux, Damien
Delias, Arnaud
Blondy, Pierre
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2016, 64 (01) : 271 - 278
[22] 3-D low-loss coplanar waveguide transmission lines in multilayer MMICs
Vo, Van Tuyen
Krishnamurthy, Lokesh
Sun, Qing
Rezazadeh, Ali A.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2006, 54 (06) : 2864 - 2871
[23] Design of Antenna Feed with Amplified Power Distribution Using Groove-Gap Waveguide Technology
Sanchez-Cabello, Carlos
Inclan-Sanchez, Luis
Vazquez-Roy, Jose-Luis
Rajo-Iglesias, Eva
2017 11TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2017, : 1661 - 1664
[24] Characterization of 3-D printed porous materials for use in a low cost impedance tube
Tapia, Candace
Frederickson, Carl
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2023, 153 (03):
[25] A Fully 3-D Printed Waveguide and Its Application as Microfluidically Controlled Waveguide Switch
Khan, Sabreen
Vahabisani, Nahid
Daneshmand, Mojgan
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2017, 7 (01): : 70 - 80
[26] A SCALABLE 3-D PRINTED BIOLOGICAL ASSEMBLY TECHNOLOGY
Chu, Sangwook
Brown, Adam D.
Culver, James N.
Ghodssi, Reza
2019 20TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS & EUROSENSORS XXXIII (TRANSDUCERS & EUROSENSORS XXXIII), 2019, : 1611 - 1614
[27] DESIGN of a 3-DB directional coupler based on groove gap waveguide technology
Zarifi, D.
Shater, A. R.
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2017, 59 (07) : 1597 - 1600
[28] Low-Dispersive Leaky-Wave Antenna Integrated in Groove Gap Waveguide Technology
Wang, Lei
Luis Gomez-Tornero, Jose
Rajo-Iglesias, Eva
Quevedo-Teruel, Oscar
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2018, 66 (11) : 5727 - 5736
[29] 3-D Printed Iris Waveguide Filter in W-band
Fujiwara, Kohei
Kobayashi, Ryuichi
Kuwahara, Satoshi
Takemura, Shota
Takizawa, Kohei
Watanabe, Yuta
2020 23RD INTERNATIONAL MICROWAVE AND RADAR CONFERENCE (MIKON 2020), 2020, : 346 - 349
[30] Monolithic Stereolithography 3-D Printed Microwave Passive Waveguide Devices
Li, Jin
Huang, Guanlong
Yuan, Tao
2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 2018, : 1689 - 1690

← 1 2 3 4 5 →