An Efficient Inverse Method for Determining the Material Parameters and Coefficient of Friction in Warm Rolling Process

被引：4

作者：

Yadav, V. ^{[2
]}

Singh, A. K. ^{[1
]}

Dixit, Uday Shanker ^{[2
]}

机构：

[1] Indian Inst Technol Guwahati, Dept Civil Engn, Gauhati 781039, Assam, India

[2] Indian Inst Technol Guwahati, Dept Mech Engn, Gauhati 781039, Assam, India

来源：

ADVANCES IN MATERIAL FORMING AND JOINING | 2015年

关键词：

Flow stress; Temperature distribution; Finite element method; Inverse analysis; Warm rolling; FLOW-STRESS; INTERFACE FRICTION; CONTACT STRESS; HEAT-FLUX; STRIP; STEEL; TEMPERATURE; BEHAVIOR; WORKING;

D O I：

10.1007/978-81-322-2355-9_1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present work, the material parameters for power law and the coefficient of friction are obtained using inverse analysis by measuring exit strip temperature and slip. The procedure makes use of a finite element model for deformation and an analytical method for the estimation of temperature. A heuristic optimization algorithm is used for this purpose that minimizes the error between the measured and estimated flow stresses. The method is verified by conducting some numerical experiments.

引用

页码：1 / 28

页数：28

共 50 条

[41] An inverse method for the estimation of the vapor and liquid diffusivity coefficient of conventional and phase change material based hemp concrete [J].

Sawadogo, M. ;

Godin, A. ;

Duquesne, M. ;

Belarbi, R. ;

Hamami, A. .

CONSTRUCTION AND BUILDING MATERIALS, 2024, 422

[42] 3D modeling of material flow in friction stir welding under different process parameters [J].

Zhang, H. W. ;

Zhang, Z. ;

Chen, J. T. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 183 (01) :62-70

[43] Impact of Warm Rolling Process Parameters on Crystallographic Textures, Microstructure and Mechanical Properties of Low-Carbon Boron-Bearing Steels [J].

Sar, Mandana Zebarjadi ;

Barella, Silvia ;

Gruttadauria, Andrea ;

Mombelli, Davide ;

Mapelli, Carlo .

METALS, 2018, 8 (11)

[44] Determining the influence of process parameters on the induction hardening of AISI 1040 steel by an experimental design method [J].

Onan, M. ;

Baynal, K. ;

Unal, H. I. .

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015, 22 (05) :513-520

[45] Effect of the uncertainty of multi-cut contour method and friction coefficient on residual stresses of constrained groove pressing process [J].

Nazari, F. ;

Honarpisheh, M. ;

Zhao, H. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (11) :2039-2052

[46] Influence of base material characteristics and process parameters on frictional heat generation during Friction Stir Spot Welding of steels [J].

Andrade, D. G. ;

Leitao, C. ;

Rodrigues, D. M. .

JOURNAL OF MANUFACTURING PROCESSES, 2019, 43 :98-104

[47] Effect of Material Properties and Process Parameters on Morphology and Strength of Friction-Stir-Welded Dissimilar T-Joints [J].

Manuel, N. ;

Costa, J. M. ;

Loureiro, A. .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (08) :5233-5244

[48] Influence of Coating Material and Cutting Parameters on Surface Roughness and Material Removal Rate in Turning Process Using Taguchi Method [J].

Moganapriya, C. ;

Rajasekar, R. ;

Ponappa, K. ;

Venkatesh, R. ;

Jerome, S. .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) :8532-8538

[49] Inverse Method to Determine Parameters for Time-Dependent and Cyclic Plastic Material Behavior from Instrumented Indentation Tests [J].

Sajjad, Hafiz Muhammad ;

Chudoba, Thomas ;

Hartmaier, Alexander .

MATERIALS, 2024, 17 (16)

[50] Effect of process parameters on material strength (AA6061-T6) during Friction Stir Processing: Simulation and Experimental validation [J].

Puviyarasan, M. ;

Pushkaran, S. ;

Senthil, T. S. ;

Karthikeyan, K. Raja .

MATERIALS TODAY-PROCEEDINGS, 2022, 62 :543-550

← 1 2 3 4 5 →