Effects of Interphase Forces on Fluid Flow in Gas-Stirred Steel Ladles Using the Eulerian-Lagrangian Multiphase Approach

被引:36
作者
Duan, Haojian [1 ]
Ren, Ying [1 ]
Zhang, Lifeng [1 ]
机构
[1] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China
关键词
NUMERICAL-SIMULATION; 2-PHASE FLOW; STEELMAKING LADLES; LIQUID REACTIONS; MASS-TRANSFER; MIXING TIME; TURBULENCE; INJECTION; BEHAVIOR; MODEL;
D O I
10.1007/s11837-018-3045-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The multiphase fluid flow in a gas-stirred system for steelmaking ladles is simulated using an Eulerian-Lagrangian approach. The effects of interphase forces and the bubble-induced turbulence on the fluid flow and the bubble behavior are analyzed by comparing with the measured data. It is found that the drag force strongly affects the velocity field and bubble volume fraction in the plume, but hardly influences the bubble plume shape. The lift force is mainly responsible for the spreading of the bubble plume, and the bubble plume becomes wider as the lift coefficient increases. The virtual mass force has a significant effect on the bubble volume fraction and should be considered reasonable. The pressure gradient force is negligible because it hardly affects the bubble plume dynamic. On increasing the bubble-induced turbulence, the bubble plume becomes wider and the liquid velocity and the bubble volume fraction in bubble plume are reduced.
引用
收藏
页码:2128 / 2138
页数:11
相关论文
共 46 条
[31]  
Roy T., 1981, JOM, V33, P42
[32]   HYDRODYNAMICS OF GAS STIRRED MELTS .1. GAS-LIQUID COUPLING [J].
SAHAI, Y ;
GUTHRIE, RIL .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1982, 13 (02) :193-202
[33]   MEASUREMENT AND MODELING OF TURBULENCE IN THE GAS-LIQUID 2-PHASE ZONE DURING GAS INJECTION [J].
SHENG, YY ;
IRONS, GA .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1993, 24 (04) :695-705
[34]   THE IMPACT OF BUBBLE DYNAMICS ON THE FLOW IN PLUMES OF LADLE WATER MODELS [J].
SHENG, YY ;
IRONS, GA .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1995, 26 (03) :625-635
[35]   FLOW PATTERN VELOCITY AND TURBULENCE ENERGY MEASUREMENTS AND PREDICTIONS IN A WATER MODEL OF AN ARGON-STIRRED LADLE [J].
SZEKELY, J ;
WANG, HJ ;
KISER, KM .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1976, 7 (02) :287-295
[36]   TURBULENCE IN 2-PHASE DISPERSED FLOWS [J].
THEOFANOUS, TG ;
SULLIVAN, J .
JOURNAL OF FLUID MECHANICS, 1982, 116 (MAR) :343-362
[37]   Drag coefficients of single bubbles under normal and micro gravity conditions [J].
Tomiyama, A ;
Kataoka, I ;
Zun, I ;
Sakaguchi, T .
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 1998, 41 (02) :472-479
[38]   MIXING TIME AND LIQUID CIRCULATION RATE IN STEELMAKING LADLES WITH VERTICAL GAS INJECTION [J].
TURKOGLU, H ;
FAROUK, B .
ISIJ INTERNATIONAL, 1991, 31 (12) :1371-1380
[39]   Gas-liquid reaction model in gas-stirred systems: Part 1. Numerical model [J].
Venturini, Gabriela ;
Goldschmit, Marcela B. .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2007, 38 (03) :461-475
[40]   A STUDY ON THE MATHEMATICAL-MODELING OF TURBULENT RECIRCULATING-FLOWS IN GAS-STIRRED LADLES [J].
WOO, JS ;
SZEKELY, J ;
CASTILLEJOS, AH ;
BRIMACOMBE, JK .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1990, 21 (02) :269-277