EVALUATION OF MANUFACTURING TOLERANCE USING A STATISTICAL METHOD AND EXPERIMENTATION

被引：23

作者：

Barkallah, M. ^{[1
]}

Louati, J. ^{[1
]}

Haddar, M. ^{[1
]}

机构：

[1] Univ Sfax, Sfax Engn Sch ENIS, Mech Modelling & Prod Res Unit U2MP, Sfax 3038, Tunisia

来源：

INTERNATIONAL JOURNAL OF SIMULATION MODELLING | 2012年 / 11卷 / 01期

关键词：

Manufacturing Tolerancing; Statistical Analysis; Simulation; Three-Dimensional Model; Process Planning; REPRESENTATION; WORKPIECE; DESIGN;

D O I：

10.2507/IJSIMM11(1)1.194

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper proposes a study of a milling process planning to determine the tolerancing for manufacturing using statistical tool. The deviation between the machined surface and the surface corresponding to the nominal one due to combined errors is expressed in terms of the small displacement torsor parameters. These parameters are considered as random variables, displacements are expresses as variances. Experimentation is realised on a set of manufactured parts which consists of measuring various defects on machine-tool. The experimental results and the simulation results are compared in this paper. (Received in March 2011, accepted in August 2011. This paper was with the authors 1 month for 1 revision.)

引用

页码：5 / 16

页数：12

共 23 条

[1] Generation of manufacturing tolerancing with ISO standards [J].

Anselmetti, B ;

Louati, H .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (10) :1124-1131

[2] OPTIMIZATION OF A WORKPIECE CONSIDERING PRODUCTION REQUIREMENTS [J].

ANSELMETTI, B ;

BOURDET, P .

COMPUTERS IN INDUSTRY, 1993, 21 (01) :23-34

[3]

Bouaziz Z., 2006, International Journal of Simulation Modelling, V5, P5, DOI 10.2507/IJSIMM05(1)1.059

[4]

Bourdet P., 1996, Advanced Mathematical Tools in Metrology II, P110

[5] Possibilities of Using Three-Dimensional Optical Scanning in Complex Geometrical Inspection [J].

Brajlih, Tomaz ;

Tasic, Tadej ;

Drstvensek, Igor ;

Valentan, Bogdan ;

Hadzistevic, Miodrag ;

Pogacar, Vojko ;

Balic, Joze ;

Acko, Bojan .

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2011, 57 (11) :826-833

[6] MODELLING OF THE 3D MACHINING GEOMETRIC DEFECTS ACCOUNTING FOR WORKPIECE VIBRATORY BEHAVIOUR [J].

Chaari, R. ;

Abdennadher, M. ;

Louati, J. ;

Haddar, M. .

INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2011, 10 (02) :66-77

[7]

Clement A., 1994, Cotation Tridimensionnelle Des Systemes Mecaniques: Theorie Et Pratique

[8] A matrix approach to the representation of tolerance zones and clearances [J].

Desrochers, A ;

Riviere, A .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1997, 13 (09) :630-636

[9]

Duret D, 1995, ACT SEM TOL CHAIN CO

[10] A Methodology for Quantifying the Kinematic Position Errors due to Manufacturing and Assembly Tolerances [J].

Flores, Paulo .

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2011, 57 (06) :457-467

← 1 2 3 →