Synthesis, structural, optical and radiation shielding features of tungsten trioxides doped borate glasses using Monte Carlo simulation and phy-X program

A novel glass system consists of six glasses was fabricated using melt quenching process according the chemical formula (60-x) B2O3 + 20Na(2)O(2) + 20Bi(2)O(3) + xWO(3):x = 0, 1, 2, 3, 4 and 5 wt%. Archimedes method was used to determine the density and molar volume of the fabricated glasses. Moreover, the X-ray diffraction technique was used to show the variation of the amorphous phase with the addition of WO3 contents for the fabricated glasses. The optical features such as the refractive index (n), energy gap (E-g), distribution energy (E-d) and oscillation energy (E-o) were calculated based on the absorbance obtained from the UV-visible spectrum. The electromagnetic radiation (gamma ray) shielding capacity was evaluated using Monte Carlo simulation (MCNP 5) code in addition to Phy-X program. The results showed that the highest linear attenuation coefficient (LAC) occurred at 0.015 MeV and increased from 99.532 to 138.656 cm(-1) for glasses coded as W 1 and W 6 respectively. The obtained results showed an enhancement of gamma ray shielding capacity with the addition of WO3 (wt%) to the fabricated glasses. Based on the estimated LAC, other shielding properties were calculated such as the glass half value layer (HVL), mean free path (MFP) and effective atomic number (Z(eff)). Finally, the ability of the fabricated glasses to resist the charged particles (alpha and proton) and uncharged neutrons were also estimated using SRIM program and theoretical calculation. The obtained results refer that the insertion of WO3 contents improves the shielding capacity for alpha and protons while it reduces the effective removal cross section of the fabricated glasses.