Mechanism of burr formation in milling

被引：12
|
作者：
Wang, GC [1 ]
Zhang, CY
机构：
[1] Jiangsu Univ, Sch Mech Engn, Zhenjiang, Jiangsu, Peoples R China
[2] Jiangsu Univ, Sch Chem & Chem Engn, Zhenjiang, Jiangsu, Peoples R China
[3] Jiangsu Univ, Sch Chem & Chem Engn, Zhenjiang, Jiangsu, Peoples R China
来源：
ADVANCES IN GRINDING AND ABRASIVE PROCESSES | 2004年 / 259-2卷
关键词：
metal cutting; burr; milling; precision machining;
D O I：
10.4028/www.scientific.net/KEM.259-260.278
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The burr is one of the common phenomena occurring in machining. The form of cutting burr produced in milling process is classified. Then the forming principle of cutting-direction burr is experimented and the related theories are analyzed. The specific critical depth of cut a(pI) is given and the main influencing factors of burrs are obtained. Furthermore, some measures to control and decrease the cutting-direction burrs in milling are proposed.
引用
收藏
页码：278 / 281
页数：4
相关论文
共 50 条
  • [1] Mechanism of burr formation in slot milling al-alloy
    Luo, M.
    Liu, G.
    Chen, M.
    ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, 2006, : 127 - +
  • [2] Mechanism of burr formation in slot milling Al-alloy
    Luo, M.
    Liu, G.
    Chen, M.
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 31 (01) : 63 - 71
  • [3] Milling burr formation, modeling and control: A review
    Niknam, Seyed Ali
    Songmene, Victor
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (06) : 893 - 909
  • [4] Researches on Burr Formation in Milling Al-Alloy
    Chen, Ming
    Rong, Bin
    Liu, Gang
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 164 - +
  • [5] Aspects of burr formation in bandsaw teeth manufactured by milling operation
    Sarwar, Mohammed
    Haider, Julfikar
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2010, 26 (06) : 596 - 601
  • [6] Characteristics and Mechanism of Top Burr Formation in Micro-Milling LF21
    Luan, Yihan
    Lu, Xiaohong
    Hou, Pengrong
    Liang, Steven Y.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (07):
  • [7] Analysis of friction and burr formation in slot milling
    Niknam, Seyed Ali
    Songmene, Victor
    VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2014, 17 : 755 - 759
  • [8] Prediction of thickness and height of burr based on burr formation mechanisms in end milling
    Kruy, Sothea
    Aoyama, Hideki
    Ohta, Kentaro
    Sano, Noriaki
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2014, 8 (04):
  • [9] Influence of Minimum Quantity Lubrication on Burr Formation in Milling
    Heisel, U.
    Schaal, M.
    Wolf, G.
    BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, : 139 - 146
  • [10] Effect of edge beveling on burr formation in face milling
    Saha, P. P.
    Das, D.
    Das, Santanu
    Proceedings of the 35th International MATADOR Conference: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCE, 2007, : 199 - 202
12345