High dielectric constant thin film EBG power/ground network for broad-band suppression of SSN and radiated emissions

被引:39
作者
Lee, J [1 ]
Kim, H [1 ]
Kim, J [1 ]
机构
[1] Korea Adv Inst Sci & Technol, Dept Elect Engn, Taejon 305701, South Korea
关键词
electromagnetic bandgap (EBG); power distribution network impedance; radiated emission; simultaneous switching noise (SSN);
D O I
10.1109/LMWC.2005.852779
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
We experimentally demonstrated the great advantages of a high dielectric constant thin film electromagnetic bandgap (EBG) power distribution network (PDN) for the suppression of power/ground noises and radiated emissions in high-performance multilayer digital printed circuit boards (PCBs). Five-layer test PCBs were fabricated and their scattering parameters measured. The power plane noise and radiated emissions were measured, investigated and related to the PDN impedance. This successfully demonstrated that the bandgap of the EBG was extended more than three times, covering a range of hundreds of MHz using a 1-cm x 1-cm EBG cell, the SSN was reduced from 170 mV to 10 mV and the radiated emission was suppressed by 22 dB because of the high dielectric constant thin film EBG power/ground network.
引用
收藏
页码:505 / 507
页数:3
相关论文
共 6 条
[1]   Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuits [J].
Abhari, R ;
Eleftheriades, GV .
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2003, 51 (06) :1629-1639
[2]   A novel power plane with integrated simultaneous switching noise mitigation capability using high impedance surface [J].
Kamgaing, T ;
Ramahi, OM .
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2003, 13 (01) :21-23
[3]   Suppression of GHz, range power/ground inductive impedance and simultaneous switching noise using embedded film capacitors in multilayer packages and PCBs [J].
Kim, H ;
Sun, BK ;
Kim, J .
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2004, 14 (02) :71-73
[4]  
Na NJ, 2000, IEEE T ADV PACKAGING, V23, P340, DOI 10.1109/6040.861546
[5]   Miniaturized electromagnetic bandgap structures for ultrawide band switching noise mitigation in high-speed printed circuit boards and packages [J].
Shahparnia, S ;
Ramahi, OM .
ELECTRICAL PERFORMANCE OF ELECTRONIC PACKAGING, 2004, :211-214
[6]   Power-bus decoupling with embedded capacitance in printed circuit board design [J].
Xu, MJ ;
Hubing, TH ;
Chen, J ;
Van Doren, TP ;
Drewniak, JL ;
DuBroff, RE .
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2003, 45 (01) :22-30