The effects of mechanical alloying on the compressibility of aluminium matrix composite powder

被引：102
作者：
Fogagnolo, JB
Ruiz-Navas, EM
Robert, MH
Torralba, JM
机构：
[1] Univ Estadual Campinas, BR-13083970 Campinas, SP, Brazil
[2] Univ Carlos III Madrid, Madrid, Spain
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2003年 / 355卷 / 1-2期
关键词：
aluminium matrix composites; mechanical alloying; powder pressing;
D O I：
10.1016/S0921-5093(03)00057-1
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
High-energy milling changes the compressibility of powder material due to the work hardening effect and the changes in the powder morphology. Aluminium 6061 powder alloy reinforced with AlN was mechanically alloyed for different lengths of time and the compressibility of the obtained powder was determined. The results are explained in terms of the plastic deformation capacity of the powders, which is influenced by the hardness and the morphology of the powder. With increased milling time, powder compressibility is reduced. The equiaxed morphology of the as-received unreinforced aluminium powder also induces low compressibility, which is improved by the simple addition of reinforcement particles. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：50 / 55
页数：6
相关论文
共 50 条
[31]   In-Situ Synthesis of Aluminum Matrix Composite from Al–NiO System by Mechanical Alloying [J].
Samaneh Mamnooni ;
Ehsan Borhani ;
Davoud Bovand .
Metals and Materials International, 2021, 27 :1631-1638
[32]   In Situ Tungsten Carbide Formation in Nanostructured Copper Matrix Composite Using Mechanical Alloying and Sintering [J].
Yusoff, Mahani ;
Zuhailawati, Hussain .
MATERIALS, 2022, 15 (07)
[33]   MECHANICAL ALLOYING AS A WAY TO PRODUCE ALUMINUM MATRIX COMPOSITE WITH TiB2 PARTICLES AS A REINFORCEMENT [J].
Hanusova, Petra ;
Dlouhy, Ivo .
METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, :1726-1731
[34]   Synthesis of TiC Powder by Mechanical Alloying of Titanium and Asphalt [J].
李渤 ;
崔立山 ;
郑雁军 ;
徐春明 .
ChineseJournalofChemicalEngineering, 2007, (01) :138-140
[35]   Synthesis of WSi2 powder by mechanical alloying [J].
Feng, P. Z. ;
Wang, X. H. ;
Qiang, Y. H. ;
Qu, X. H. .
POWDER METALLURGY, 2008, 51 (04) :298-302
[36]   CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING [J].
XiongXiang HuangBaiyun LeiChangmin LuHaibo Central South University of TechnologyChangsha China .
TransactionsofNonferrousMetalsSocietyofChina, 1993, (02) :65-69
[37]   Estimation of entrapped powder temperature during mechanical alloying [J].
Joardar, J ;
Pabi, SK ;
Murty, BS .
SCRIPTA MATERIALIA, 2004, 50 (09) :1199-1202
[38]   Mechanical alloying of alumina-yttria powder mixtures [J].
Alkebro, J ;
Begin-Colin, S ;
Mocellin, A ;
Warren, R .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (12) :2169-2174
[39]   Synthesis of TiC powder by mechanical alloying of titanium and asphalt [J].
Li Bo ;
Cui Lishan ;
Zheng Yanjun ;
Xu Chumning .
CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2007, 15 (01) :138-140
[40]   Processing of aluminium alloys containing titanium addition by mechanical alloying [J].
Cardoso, KR ;
Rodrigues, CAD ;
Botta, WJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :1201-1205
12345